Ratings Selection New technologies Reviews

Top 10 Tile Adhesives

In search of plastic and elastic

Top 10 Tile Adhesives

The range of tile adhesives has dozens, and maybe even hundreds of items. In stores, separate categories are allocated for exterior and interior compositions; there is a gradation in cost; Often there are separation of dry mixes for wall and floor tiles. Each manufacturer is in a hurry to offer its product line, and consumers are puzzled: which tile adhesive is better, and what you need to buy, so that the tile does not disappear in a week.

Knowing the fundamentals of physics, chemistry and the specific requirements for high-quality veneer, it can be argued that good glue should be:

  • ductile - do not stratify and not spread in the process of gluing;
  • elastic - to withstand the deformation loads in the already hardened state;
  • low drying speed - for possible adjustments and conducting auxiliary manipulations;
  • with high adhesion rates - securely hold tiles of any size.

To understand exactly which manufacturer of tile adhesives deserves maximum confidence, we will try to evaluate the most popular brands. As "representatives" we will choose dry mixes with indicators close to universal ones.

1. KNAUF Fliesen
the best tile adhesive for meticulous work and difficult surfaces

image
Photo: poiskplitki.ru

Rating: 10 points out of 10

Estimated price: 250 rub / 25 kg.

According to reviews on professional forums, this tile adhesive is considered one of the best among the many proposals for dry mixes. Pragmatic Germans provided for everything necessary for thorough and high-quality work. Glue equally successfully used for laying floor and wall tiles, and the type and texture of surfaces are not significant. Drying speed is slow, which allows you to consistently perform work on laying, cleaning joints and grouting. KNAUF Flisen is considered an economical solution, since it can be applied with a thin layer (0.7 cm) without sacrificing adhesion quality. Suitable for work "under the comb", has a high elasticity, which allows the composition to be used when facing sections of complex configurations.

2. UNIS 2000
good tile adhesive with a strong grip

 

image
Photo: optinaz.ru

Rating:10 points out of 10

Estimated price: 250 rub / 25 kg.

Tiled glue Eunis leads an active fight against Knauf for first place and often benefits, especially in terms of adhesion and drying rate. With a solution vitality of 3 hours, it is necessary to take into account that the time allocated for laying and adjusting the tile is 10 minutes, and you can walk on the laid material after a day. Glue perfectly behaves with frosts and high humidity, and due to its high elasticity, it tolerates the deformation of materials with temperature drops. If you prefer UNIS 2000 glue, you need to tune in to the high rate of work, because, as the masters themselves say, after 24 hours you will not “sew” the seams. As for consumption, here the figures are close to ideal - from 3.75 to 5 kg per square meter.

3. OSNOVIT Muspliks T-12
best tile adhesive for rough surfaces

image
Photo: www.spbstroy.ru

Rating: 9.9 points out of 10

Estimated price: 250 rub / 25 kg.

A worthy contender for third place, which can oppose its leveling properties to competitors. Even with significant surface differences, tile adhesive Mustpliks T-12 copes with its work. And this is not a manufacturer’s advertising move, reviews of construction organizations confirm this fact. Glue is allowed to be used for laying ceramic tiles, as well as for facing with ceramic granite and natural stone. High adhesive properties make it easy to lay finishing materials from top to bottom.

4. Ceresit CM-11
good all-purpose tile adhesive

 

image
Photo: www.lkvlg.ru

Rating: 9.8 points out of 10

Estimated price: 265 rubles / 25 kg.

You can talk about this glue for a long time - its advantages are appreciated both by professionals and amateurs, but it did not come to the first place, so to speak, due to excessive universality (the composition is not suitable for some types of tile). Ceresit SM-11 glue is worth buying when laying is carried out on a not very flat surface, when a novice is taken for facing, and if there are no separate wishes for the mixture, based on the parameters of ceramic tile. Possessing adhesion of more than 1.0 MPa, the glue adheres perfectly and practically eliminates the sliding of the facing material along the wall. Recommended for laying your own tiles at home for indoor use.

5. IVSIL Mosaik
tile adhesive with good water repellency

image
Photo: mer-instrument.ru
 

Rating: 9.8 points out of 10

Estimated price: 480 rub / 25 kg.

It combines two advantages that allowed this tile adhesive to be included in the list of the best in the construction market: a snow-white color and excellent adhesion strength. According to these criteria, IVSIL Mosaik falls into the professional category. The manufacturer indicates the adhesion of the finished mixture equal to more than 1.0 MPa, that is, you can be sure of the quality when working with almost any tile material. The preferred area of ​​application is facing with mosaic tiles, glass and translucent, as well as with natural stone of high porosity. It has no strict restrictions on weather conditions and humidity, implies a fairly intensive pace of work. Suitable for facing bathrooms, saunas, water tanks, pools.

6. LITOFLEX K80
the best adhesive for professional tiling

image
Photo: www.parket-plitka.ru

Rating: 9.5 points out of 10

Estimated price: 530 rubles / 25 kg.

It is considered a professional glue for laying porcelain stoneware, but it is equally successfully used for work with wall tiles. High adhesion rates make it possible to use Litoflex K80 for complex operations: arranging underfloor heating, laying tiles on tiles. Glue has excellent elasticity, which makes it an ideal assistant for interior and exterior work, if necessary, facing facades and socles of buildings of various categories. Allowed to apply a thin layer that allows you to carefully spend the dry mixture in the work.

7. Bergauf Mosaik
best glue for mosaic and glass tiles

 

image
Photo: www.ok-stroy.ru

Rating: 9.5 points out of 10

Estimated price: 645 rub / 25 kg.

As the name implies, glue is recommended for work with such a capricious material as mosaic. At the same time, the standard sphere of use is not excluded: for ceramic tiles, decorative and natural stone, as well as for large-sized plates. The white color of the mixture and the finished mortar allows you to apply Bergauf Mosaik to work with marble, white tile and mosaics on a translucent and monophonic base. High adhesion, plasticity and elasticity make it possible to carry out exterior finishing works, as well as use in conditions of high humidity. The glue is not capricious - it does not require special preparation of the base and even allows laying under an inclination on brick, plaster, cement, concrete, metal, plywood. Restrictions in scope are absent

8. MIRA 3130 superfix
the best of single component cement tile adhesives

 

image
Photo: kodumaailm.ee

Rating: 9.6 points out of 10

Estimated price: 650 rubles / 25 kg.

Adhesive ideal for working in wet areas. It is recommended for use for cladding showers and bathrooms, while it is well suited even for such capricious materials as mosaic or thin translucent tiles. Using MIRA 3130, you can not worry that expensive and beautiful finishing material will disappear from the walls due to excessive humidity - the quality of the dry mixture ensures excellent results. High adhesiveness, adhesion, water resistance and frost resistance are characteristic of the glue.

9. Sopro 450
point glue-resistant tile adhesive

 

image
Photo: snab-rf.ru

Rating: 9.9 points out of 10

Estimated price: 700 rubles / 25 kg.

Reinforced cement-based adhesive for professional use. Sopro tile glue guarantees the longest possible service life of finishing materials, virtually eliminates splitting and damage to the tiles during operation due to the presence of reinforcing fibers in the mixture. Shows excellent elasticity and adhesion. It differs from similar dry mixes with increased water-repellent properties, which allows facing works in pools and saunas. Recommended for laying mosaic, tile, natural stone.

10. Keraflex Maxi
the best adhesive for large and heavy tiles

 

image
Photo: www.alprom74.ru

Rating: 9.2 points out of 10

Estimated price: 1,100 rubles / 25 kg.

If you need a dust-free glue during the mixing process, suitable for all types of building materials and featuring good performance in all respects and allowing you to tile without first leveling the walls, Keraflex Maxi is your best choice. The composition is easily kneaded, plastic and easy to use. Perfectly holds even very heavy and large-format tiles on vertical surfaces. Eliminates slipping in the process of laying. Possesses excellent elasticity and practically has no restrictions in spheres of use. But it is very expensive!

Which tile adhesive is better to buy?

Asking what tile adhesive is best to buy, deal with all aspects of its use. For mosaic, only white glue is needed, and high adhesion is important for porcelain stoneware. For a bathroom and a balcony, the glue should have different tolerability of humidity and low temperatures. To choose the best solution from dry mixes, pay attention to the recommendations of the Expert Price and ... good repair!

Author: Larisa Kaverina 01.10.2014
Attention! The accuracy of the information and the results of the ranking is subjective and is not an advertisement.

Ratings

Selection

New technologies