Attention! The accuracy of the information and the results of the ranking is subjective and is not an advertisement.
8 best bimetallic radiators
Reliable heat from aluminum and steel
Author: Vasily Zuev
Bimetallic radiators - a compromise between heavy and ugly cast-iron and pretty, but not the most reliable aluminum. Stainless steel has made the latter much more resistant to aggressive environment, which is most often a harsh and merciless domestic coolant. In our ranking - the best bimetallic radiators, reliable and with good heat dissipation.
| Category | A place | Name | Rating | Price |
|---|---|---|---|---|
| The best bimetallic sectional radiators with lateral connection | 1 | Global STYLE PLUS 500 | 9.9 / 10 | 8 091 |
| 2 | Sira RS Bimetal 500 | 9.8 / 10 | 8 518 | |
| 3 | Rifar monolit 500 | 9.8 / 10 | 6 305 | |
| 4 | Radena CS 500 | 9.6 / 10 | 5 980 | |
| 5 | Royal Thermo Revolution Bimetall 500 | 9.6 / 10 | 4 105 | |
| The best bimetallic sectional radiators with bottom connection | 1 | Rifar Monolit Ventil 500 | 9.7 / 10 | 9 013 |
| 2 | Rifar Base Ventil 350 | 9.6 / 10 | 7 683 | |
| Best bimetallic tubular radiators | 1 | KZTO Elegant 1 250 | 9.5 / 10 | 7 978 |
The best bimetallic sectional radiators with lateral connection
|
8 091
Global Style Plus 500 is designed primarily for high pressure and low quality coolant central heating systems. Made of steel and aluminum. Silicone pads between sections provide reliable protection against leaks. Crimping steel tubes under high pressure during the casting process makes it possible to resist the bursting pressure of water and compensate for the difference in temperature deformation of steel and aluminum in order to keep the heat transfer constant. We also note the excellent quality of coloring and greater than that of most analogs, the diameter of the intercollector tube. Working pressure - up to 35 atmospheres.
Main advantages:
Minuses:
|
 9.9 / 10
Rating
Reviews
The difference with other radiators is visible to the naked eye. Thicker than metal wall. Very well made. |
|
8 518
Almost silent radiators, they can be safely placed in bedrooms or meeting rooms. Depending on the area of the room, up to 12 sections can be placed in one block. The steel inner shell is corrosion resistant and can be used with poor quality heat transfer media. Paint - not the strongest side of this radiator, but if you do not cause mechanical damage, it can hold out for a long time. Heat transfer at a high level, the maximum working pressure is an impressive 40 atmospheres, the radiator is not afraid of water hammer and other troubles of the central heating system.
Main advantages:
Minuses:
|
 9.8 / 10
Rating
Reviews
Excellent radiators, heat very well, in the winter almost all the time in the kitchen window for ventilation is. |
|
6 305
The model of the Russian manufacturer is a single steel block coated with aluminum. This design almost completely eliminates the possibility of leakage. The radiator is resistant to low-quality coolant, as well as to changes in its temperature. Along with water can be used and antifreeze. The maximum working pressure is 100 atmospheres, the radiator is excellent for central heating systems.
Main advantages:
Minuses:
|
 9.8 / 10
Rating
Reviews
Outwardly, they are very pleasant. No sharp corners.I was warned that due to the fact that the inside is a monolithic piece of steel, they heat a little weaker than the same Rifar Base. But for me it does not matter. |
|
5 980
Radiators of the famous Italian brand (some of the products are manufactured in Italy, some in China) are designed specifically for use in central heating systems (although they will come to the court and in individual residential buildings). Unlike many competitors, they perform well at low coolant temperature. Steel pipes withstand high pressure, water hammer, protected from corrosion. Maximum working pressure - 25 bar. In one block, the manufacturer mounts up to 14 sections.
Main advantages:
Minuses:
|
 9.6 / 10
Rating
Reviews
Immediately with the onset of cold weather, I felt a significant difference, the heat emission compared to cast iron batteries differs many times for the better. |
|
Domestic radiator with high-alloy steel collector for use in central heating systems. He is not afraid of water hammer and low-quality coolant (along with water, antifreeze can also be used). Thanks to the use of technology PowerShift (additional fins on the collector) has increased heat transfer by 5%. Paint is applied in seven steps. The maximum number of sections in one block is 14. Working pressure is up to 30 bar.
Main advantages:
Minuses:
|
 9.6 / 10
Rating
Reviews
This radiator is recommended to those who are doing well with the temperature of the coolant - then you will be in chocolate. |
The best bimetallic sectional radiators with bottom connection
|
9 013
Radiator of wide application: due to the mixed method of heating (convection + radiation), this model is in demand not only in residential buildings, but also in kindergartens, medical institutions, schools. The radiator is a single steel block, covered with aluminum. This design almost completely eliminates the possibility of leakage. The model is resistant to low-quality coolant, as well as to changes in its temperature. Along with water can be used and antifreeze. The maximum working pressure is 100 bar.
Main advantages:
Minuses:
|
 9.7 / 10
Rating
|
|
7 683
An excellent design solution for holding a single style in a room with different heights of radiator installation. The model is suitable for an apartment building with central heating, and for a cottage with an individual boiler. Heat output is quite high, as is the maximum heating temperature (up to 135 degrees). The system operating pressure is up to 20 atmospheres. The radiator is easy to install, it is possible to choose different colors. The quality of painting is not the highest, but with proper operation it is not scary.
Main advantages:
Minuses:
|
 9.6 / 10
Rating
Reviews
Compared to old batteries, they heat twice as warm, directing warm air forward, that is, into the room, rather than dissipating it from behind. |
Best bimetallic tubular radiators
|
7 978
Four-stage copper-aluminum heat exchangers give the model high energy efficiency. The body is very ergonomic and compact. If desired, you can order a radiator up to 2.2 meters in both wall-mounted and floor-mounted versions. The temperature of the heat carrier (strictly water) is up to 130 ° C, the working pressure is up to 15 atm. It can be used in central heating systems, but greater reliability is achieved in residential buildings with individual heating systems.
Main advantages:
Minuses:
|
 9.5 / 10
Rating
Reviews
You need to install it carefully, but in general these are good radiators, they heat and do not eat a lot of money. |
14
Updated: 22.01.2016
Rating in categories:
