Top 5 kitchen sink manufacturers
The main criteria for choosing a good kitchen sink
Manufacturer. From the manufacturer depends on the quality of materials, the service life of the wash and the warranty period for the product, the compliance of products with environmental standards. This review is dedicated to the best manufacturers of kitchen sinks.
The size. It matters not only the correspondence of the diameter of the sink and the area of the kitchen. This is obvious - a large sink in a small kitchen is inconvenient, too small in a spacious kitchen will be lost (if, of course, this is not the designer's idea).
When choosing, pay attention to:
Wash width Your utensils should fit freely, including large pans, trays. Even if you use the dishwasher.
Wash depth. It is best to look in the store and try on. Splashes will scatter from too shallow sinks. Too deep uncomfortable, because you have to dive to the bottom of the dishes.
Functionality. Modern sinks can have up to 5 bowls, and there can be several main, deep bowls and 1-2 additional compartments on the side, plus one or more side wings (most often used for drying).
The form. Which one you like and which is more convenient - round, oval, square, rectangular, triangular, polygonal.
Mounting method: invoice, mortise or embedded. Overhead - the most popular, when installed is placed on top of the countertop. Mortise mounted in the hole in the tabletop, in the finished form acts above the surface. Built-in is mounted flush with the table top.
Material. The beauty of the whole kitchen depends on the washing material. You have to choose the best sink among metal (steel, enameled, bronze, etc.), ceramic sinks, sinks made of natural stone or the so-called artificial stone (composite).
A place | Name | Rating |
---|---|---|
1 | Franke (Switzerland) | 10 / 10 |
2 | Blanco (Germany) | 9.7 / 10 |
3 | Alveus (Slovenia) | 9.0 / 10 |
4 | GranFest (Russia) | 6.5 / 10 |
5 | Florentina (Russia) | 6.0 / 10 |
Franke (Switzerland)
The leader of our ranking of the best kitchen sink manufacturers is the Swiss concern Franke AG. Franke is more than 80 enterprises in 40 countries of the world, including Russia (plants in St. Petersburg and Yekaterinburg), Germany, Italy, the USA and others. The company was established in 1911 and began with products from sheet metal. Since 1931, starts the production of sinks from an alloy of copper and nickel, as well as stainless steel. Already in 1938, the line for the production of the first seamless kitchen units was launched. As time has shown, it was one of the most successful "moves" Franke. Today, the concern specializes in the production of kitchen equipment for domestic and commercial needs (restaurants, cafes, hotels). Regular customers since 1974 are such major fast-food companies as McDonalds, KFC and many others. In addition to the sinks in the range:
Of particular interest to retail customers are car washes made in a wide range. Customers can purchase products with widths ranging from 200 to 1050 mm. No other competitor has such a choice. Franke offers kitchenware from:
Main advantages:
Minuses:
|
10 / 10
Rating
Reviews
Bought sink FRANKE PXL 651-78 with a surface under flax. Looks very nice, drops and stains are not visible. Hot pots and pans do not leave a trace. But if you do not wash the week, then there is a lime scale, which is removed only by chemical means. |
Blanco (Germany)
Since 1925, the German company Blanco has produced a wide range of kitchen and medical equipment under the same-name brand. In assortment various mixers, various accessories and, certainly, every possible sinks. The main production is located in Germany, and specialized factories for the production of certain categories, for example, ceramic sinks, are geographically located in Turkey and Poland. About Blanco, you can safely say that this is the trendsetter of kitchen fashion. The main advantages are high quality and variety of the offered products. Each buyer will find the best kitchen sink to his liking: with one or two bowls, corner or round, mortise or under the countertop. If you wish, you can not limit yourself in size or in colors. This is because the company manufactures sinks for cabinets ranging in size from 40 cm to 90 cm. Add to this a wide selection of shades from rich black to pale mother-of-pearl, competent design according to the principle of “nothing superfluous” and you will understand that this is what you searched. The manufacturer produces good kitchen sinks from:
Main advantages:
Minuses:
|
9.7 / 10
Rating
Reviews
I chose the same sink under the white furniture from the corner of silage Zia 9E. Very good wash - and beautiful, and comfortable, not splashing, surprisingly quiet. But it gets dirty very fast, you have to clean it every other day. Well at least the raid comes off easily and without any problems. |
Alveus (Slovenia)
Kovinoplastika Lož d.d. includes a subsidiary of PC Inox, which specializes in the production of kitchen sinks, hoods, systems for sorting and disposal of household waste, faucets, accessories and utensils under the brand Alveus. Over the 45-year history, the company has gained tremendous experience, which helps to develop and improve products. It is enough to mention that the catalog contains more than 300 models of various sinks for the kitchen with a width from 400 to 1000 mm, including corner modules. At the same time, the plant can accept an order for the production of products according to sketches and customer sizes. Kitchen sinks Alveus are made from:
Main advantages:
Minuses:
|
9.0 / 10
Rating
Reviews
Kitchen sink ALVEUS Cubo 40 installed in the kitchen a couple of years ago and did not regret. This is the best sink of artificial granite, very functional, beautiful, convenient for simultaneous washing of utensils and products. But when buying did not put clips, I had to go back to the store. In addition, it is very easy to break dishes from fine porcelain about it. |
GranFest (Russia)
The GranFest trademark, as well as Ewigstein, belongs to the Russian company Formula Komfort. The company has been operating since 2000 and has already managed to conquer the market. The product range includes:
The model range includes classic square and rectangular bowls, as well as round, angular and composite. If desired, the buyer can purchase as monoblocks, and with dryers for dishes, auxiliary tanks, etc. Sizes of products in width - from 400 mm to 1040 mm. Main advantages:
Minuses:
|
6.5 / 10
Rating
Reviews
Sink Granfest GF-R750L chosen for ergonomics and beautiful color. When installing the wizard warned that you need to handle carefully, it is fragile. The first year was very happy, everything was fine, but then inadvertently dropped the knife, a chip appeared. Now I try to do everything as carefully as possible. |
Florentina (Russia)
The Russian factory Florentina has entered the market since 2001. The initial specialization in the production of cast composites allowed us to form our own strategy and determine for ourselves the most important areas of production:
All products are manufactured under the brand Florentina and Dr. Gans. Unlike other similar Russian companies, from the very beginning, the management has attended to certification. According to the tests conducted regularly, each product is recognized as safe for others and allowed to be used in residential, medical, health and child care facilities. Products from LLC Florentina are completed with “filling” from Italian factories “Vicario Armando & C. Srl "," Guglielmi S.p.A. rubinetterie. And thanks to the presence of its own development bureau, the range is updated every year with new models. Injection washers are made from:
Main advantages:
Minuses:
|
6.0 / 10
Rating
Reviews
Bought a sink Florentine Lipsey - coveted the price. But I regretted - metal dishes leave stains on it, and stains are formed from water too. In addition, fragile, requires careful treatment. Well at least resistant to chemicals, you can even wash with an abrasive detergent. |
What kitchen sink to choose?
The kitchen sink (as opposed to the sink in the bathroom) is always in sight. Especially in Russia, where the gatherings are taken with friends in the kitchen. Therefore, manufacturers are constantly expanding the range, use a variety of materials, finishes, design solutions (sometimes very bold), and make it difficult for us, ordinary buyers, to make a choice. In our opinion, first of all it is necessary to determine the manufacturer, then - with the shape and size of the sink - these parameters depend on the area of the kitchen and the features of the furniture set. And only then comes the turn to reflect on the appearance.
And finally, one more recommendation - before you buy, be sure to write down the dimensions and go to the store, look at it live, imagine that you are washing the dishes - is it convenient for your hands. Do not be limited to the assessment of appearance. Happy shopping!