Specifications
| Main characteristics | |
|---|---|
| Type of | submersible |
| Power | 700 W |
| Control | mechanical, number of speeds: 5, smooth speed adjustment |
| Functionality | |
| Additional Modes | pulse turbo mode |
| Shredder | there is a volume of 0.5 l |
| Beaker | yes, volume 0.75 l |
| Whisk | there is |
| Features | |
| Body material | plastic |
| Submersible material | metal |
| Dimensions and weight | |
| Dimensions (W * H * D) | 6.8x39.8x6.8 cm |
| Weight | 1.98 kg |
Kenwood HB724 Blender Reviews
Virtues
- Everything is good, only .......
disadvantages
- dead in exactly a month. With full hemorrhoids services, there are only 2 of them for the whole of Moscow, and then - they make faces. Easier to buy new.
Comment
Think for yourself. buy - no.
By the way, while the essence is yes, I disassembled this unit. Immediately I will say in the service to drag useless - the unit is not collapsible !!! Well, I didn’t feel sorry, I took it apart. The engine compartment is tightly sealed with a partition, which I cut out. And the lid is not a partition made so that it can not be removed at all, without spoiling the appearance. But I tried! ;) But this did not solve the problem. Dead fuse, but not just. Along the way, several windings of the Dvigun rotor died. There are no thermal relays. The manufacturer immediately decided that there would be nothing to repair. Only the replacement of the entire unit in the collection, so when under any pretexts, they are refused. One more thing. The inscription on the 700w case is a marketing gimmick. The motor costs Jonson DC751 (2) XLLG - the maximum power of 200 watts (nominal 113 W). There are no gearboxes! Here pdf on the motor - http://www.johnsonelectric.com/en/products/motion/dc-motors/standard-dc-motors/high-voltage-dc-motors/datasheets/DC751-2-XLLG-023-metric .pdf
Here is a complete list of engines - http://www.johnsonelectric.com/en/products/motion/dc-motors/standard-dc-motors.html bookmark High Voltage DC Motors.
So instruct the wives for nuts, ice, boiled meat and other super-viscous and dry mutants: after such an outrage - blender immediately to the garbage can
al.stadnikov, 2012-10-12 Evaluation 2
Virtues
- + Power corresponds to the stated
- + Sufficient equipment (3 types of legs, a mill, a whisk, a large measuring cup)
- + Convenient management
- + Neat performance
disadvantages
- Not yet visible
Comment
For me, this is a forced purchase: it so happened that the demented patient stopped swallowing regular food. Chew chews, but spits out. Eats only semi-liquid puree food.
I have a small handy mill (Krups) and a smart Siemens hand mixer with a nozzle a la cocktail blender. Still 90s. But, unfortunately, they are not suitable for working with hot food. So we will choose an immersion blender.
So, low-power products (up to 400W) and with a minimum configuration (one leg) immediately disappeared. If we take, then the minimum should be an iron leg, a mill from 0.5l and a whisk.
The choice was between Kenwood HB-724, Bosch-7700 and Braun 730. The price is about the same (2,400-2,800 rubles). Philips was not immediately considered, because it didn’t like it in the store (big and heavy).
I read manuals, consumer reviews, compared configurations and ..., in general, bought Kenwood HB-724.
Now I can say firmly - I am not mistaken.
Especially liked the broad soup leg. Its blades are located lower than that of the main iron leg, which allows you to grind food right on the plate (well, in a saucepan, of course). With the help of another broad leg, it is easy to cook mashed potatoes from boiled potatoes and / or other cooked (soft and non-fibrous) vegetables. Only vegetables should be without raw materials, otherwise uncooked slices will be hammered under the scoop grinder).
And do not forget that:
- the blender can continuously work no more than 50 seconds, after which it needs 4 minutes. recreation;
- if your mix has solid, raw or dense components, first use the pulsing turbo mode;
- the blender is not intended for splitting ice, but this does not prohibit you to prepare various cocktails with ice;
- it is not necessary to wet the main unit of the blender with the engine!
If you follow these simple rules, this blender, I hope, will last a long time and give you and me a lot of joy!
Anonim 2012-04-01 Evaluation 5
Virtues
- Good mixer, equipment.
disadvantages
- Almost immediately, the chopper stopped working - the gear gear in the cover cracked, scrolled.And no extreme load was given to the device. I decided not to bother with a guarantee, and since ordering such a cover separately costs half the cost of the entire set, solved the problem by opening the cover (not collapsible, of course) and fitting the pinion gear with an instant superglue.
Comment
Anonim 2012-09-02 Evaluation 3
Virtues
- I bought a blender half a year ago, I was very pleased, I used all the nozzles. Especially liked the nozzle for mashed potatoes. But while whipping milkshake, the motor stopped working.
disadvantages
- Large negative model not repaired
Comment
I will change to the same
tat.sochilo, 2012-06-15 Evaluation 3
Virtues
- Like it or not - all alone virtues. ))
disadvantages
- A large number of nozzles occupy a corresponding area, i.e. in a small kitchen fits with difficulty. A bit heavy ... But these are all the little things that can be tolerated. After all, the blender performs its main purpose perfectly well.
Comment
She used all kinds of blenders, but it was Kenwood who left the most favorable impression, especially the bowl of chopper and grinder.
In the bowl everything is finely crushed, there are no large chunks left and porridge, for example, from onions, cannot be obtained. And the greens as chops! Just a fairy tale! For example, in a bowl of a blender chopper, Brown parsley or dill was constantly wound on the blade axis, so you had to pre-cut it. With the Kenwood Cup this never happened! Threw up and crushed.
Potato mashka is a great find! Without any energy consumption turned potatoes into mashed potatoes without leaving lumps. Manually just never do this.
Another surprise is that when using the whisk, the batter for pancakes did not splash in different directions.
The only nozzle for flat surfaces lay idle.
In general, the blender is good for everything: with price, quality, design, and the declared power corresponds to reality, and with a variety of nozzles ... It’s a pity that it scattered to shreds due to my husband’s ignorance, because he used it for splitting ice, and that’s why intended for
Anonim 2011-03-09 Evaluation 5
Virtues
- A lot of great tips. I use actively all (except for the corolla - there is a combine for this). I like the mill very much (although I have 4 more - but this is the most favorite one). Very convenient nozzle for a large pot. And the hit in our family is a nozzle for mashed potatoes. We use every day several times. Washes everything in the dishwasher. No problem.
disadvantages
- Two of them. While found. If in a mill to grind meat - then in a cover reducer it is slightly hammered under a spring. In general, nothing terrible. But lazily pick out. The second - at the favorite nozzle - for the potato - the plastic slot on the plastic nut broke. Dear Kenwood - do not make plastic there ..
Comment
Bought seeing ads. Now here he is perfectly attached to my kitchen. Fresh cream, ice cream, cocktails, a lot of everything in the mill. In general, every day two times in winter and five to six in summer.
Anonim 2012-01-17 Evaluation 5
