Specifications
| General characteristics | |
|---|---|
| Type of | disk |
| Design | manual |
| Power | 2150 watts |
| Number of speeds | 1 |
| Treatment | |
| Cutting height | 65 mm |
| Disc diameter | 205 mm |
| Bore diameter | 30 mm |
| Tilt angle | 45 degrees |
| Performance | |
| Rotational speed | 6400 rpm |
| Additional Information | |
| Functions and features | soft start, connect the vacuum cleaner |
| Contents of delivery | 2 hospital equipment (clamps + stand), a saw blade with carbide inserts, an emphasis for parallel cutting, 2 keys for mounting the saw blade, 2 spare brushes, an adapter for attaching a vacuum cleaner |
| Weight | 6.5 kg |
| Features | possibility of installation in a stationary position |
Reviews of the Rebir IE-5107 G2 circular saw
Virtues
- reliable, powerful tool
- spare parts are everywhere, simple design
disadvantages
- under heavy loads, the gear is destroyed and the anchor burns out (it collapses in the area of the bars)
Comment
no need to give big loads
I have been using it since 2004, it has been repaired 3 times: replacing the anchor 2 times, replacing gears and bearings.
Anonim 2011-02-22 Evaluation 4
Virtues
- powerful and simple at the same time. no problems with spare parts.
disadvantages
- I personally have a backlash of the sole and because of this it does not always saw at a right angle. clothes get dirty from sawdust.
Comment
I inherited from the construction site, apparently they didn’t take care of it, but after that I was able to build a house, bath, window-door with this saw. changed for 8 years only brushes and a couple of disks. but everything comes to an end and she, too, began to warm up the motor. Most likely you need to change the anchor, but I'll buy the same one. and Khan's bearings soon. but I will not throw it away, but I will give it to my father, he kraymit a couple of boards a year and he will have enough of it.
jakovlev.lenia, 2012-01-13 Evaluation 5
Virtues
- Powerful saw, cut height 65mm. It is possible to work permanently attached to the workbench. If desired, you can install a cutting disc for metal or concrete (with a transition ring). There is a ruler in the kit. I recommend it as a reliable tool since 2001.
disadvantages
- Replaced the cutting disc included in the kit on a disc with carbide plates 48 teeth per diameter.
Comment
I am very pleased with the purchase, I use it both for cutting wood and for the manufacture of window frames.
ol.z2011, 2012-04-28 Evaluation 5
Video review circular saw Rebir IE-5107 G2
