Specifications
| Specifications | |
|---|---|
| Grinding system | millstones |
| Power | 100 watts |
| Capacity | 125 g |
| Grinding adjustment | there is |
| Features | |
| Design | ground coffee container |
| Dimensions (WxHxD) | 14.5 x 22 x 9.5 cm |
Reviews of the coffee grinder VITEK VT-1548
Merits
- Quality thing
disadvantages
- Did not reveal
Comment
Melet coffee for espresso coffee makers. At 7-8 grinding is suitable. Grinding fraction is homogeneous, the filter in the horn does not clog, espresso turns out excellent taste. Made with high quality, everything is well adjusted, nothing rattles, does not work loudly. I think the coffee grinder is decent, worth the money.
Wives, 2013-11-21 Evaluation 5
Merits
- 1. inexpensive
- 2. simple
- 3. foolproof
- 4. millstones - uniform grinding without stirring
- 5. grinding speed
disadvantages
- 1. for espresso coffee makers need to be modernized for too coarse grinding
- 2. uncomfortable pour out ground coffee
Comment
for a french press or geyzernaya coffee maker is suitable, for espresso carob coffee makers it is necessary to reduce the degree of grinding: pull out the upper millstone knife, unscrew the screws, put a gasket under it (I used a plastic ring cut from the lid of Prings chips), fasten and install everything back.
Shevchenko Evgeny, 2015-03-12 Evaluation 4
Merits
- Compact, beautiful appearance, quiet.
disadvantages
- I had to upgrade a little. When you take out the container wakes up a little coffee.
Comment
After buying an espresso, the coffee maker thought about buying a coffee grinder with millstones because the usual rotary from the Soviet times did not suit me (it rustled like a tractor, did heterogeneous grinding), and the ground one sold in stores didn’t suit me (too big, as they say on the Internet, they specifically do universal grinding).
I chose a coffee grinder from several companies that were in the store - DELONGHI KG 79, VITEK VT-1548, KRUPS GVX 242. What can I say, when comparing the parameters, everything was the same. Power + - 10vat. The volume in general is not important for the house, there is nothing to grind a lot of coffee at once. The millstones are made from the same material, even the teeth are the same size. It remains the appearance and price. In general, judging by the material and fasteners, it seemed that they were all made at the same factory. At the first use to check the grinding, the regulator turned out to the smallest, it turned out that the grinder made the grinding a little larger than the average. Immediately he made an upgrade, as described in DELONGHI KG 79, made a ring from a container of salads and put a millstone under the top. Now the grinder grinds on 6 mode excellent homogeneous mass for espresso.
In principle, a coffee grinder is excellent, at least better than a rotary, let's see how long it is enough.
Nastin Vladislav, 2014-03-10 Evaluation 5
Merits
- good design, compactness, quality of grinding and price!
disadvantages
- not yet discovered
Comment
There was a problem with a non-standard package of very large coffee beans - I had to make a mixture - everything was milled
Sevastyanov Michael, 2013-11-24 Evaluation 5
Merits
- Convenient, compact, smooth grinding, price.
disadvantages
- The quality of plastic grinder cover.
Comment
I consider this coffee grinder to be a very good cheap one. Love the fact that you can adjust the degree of grinding. After several days of use, I stopped at a certain degree of grinding for myself and have not changed anything anymore. I fall asleep grain and press only start. There is a regulator of the number of cups, the grinding time depends on it, but each has its own criterion for the strength of the coffee, therefore the number of cups is set conditionally here.
The only drawback is that on the very first day of use cracks appeared on the cover. But they are not transparent.
Anonim 2014-02-01 Evaluation 4
Merits
- Manufacturer and seller provide an opportunity to help them with money. Grateful for the opportunity, because I am the patron of the arts.Well, another plus is quiet if you grind whole grains of coffee.
disadvantages
- It is intended neither for grinding coffee, nor anything else. The only use is crushing wheat grains, etc. for the production of super-coarse flour.
- ATTENTION! A user with hidden data after each review changes his own so that his complimentary review would always be in the top. You can identify the user by the phrase: What I want to say is a lie!
Comment
Bought to an enthusiastic review of Madame, supposedly this coffee grinder grinds finely. I want to say that this is the introduction of buyers in deception. And not by another buyer, but by a distributor: after buying, I looked at reviews for other products of this brand and saw that when the rating of their products falls, they connect managers to send feedback with a view to raising the rating.
This product does not grind, and crushes. Just look at the branded pictures of different grinding on the carton: the smallest has fractions of about 1-1.5 mm. All (I emphasize - EVERYTHING!) Millstone coffee grinders of this class have a very low-powered motor and a flimsy casing. So that the machine does not shut up, the manufacturer must leave a 1-1.5 mm gap between the millstones. This allows you to crush coffee and at the very least another grain. But you need to forget about grinding.
In general, smart people do not buy cheap coffee machines for the first time (there are rotary machines for this). And they buy such machines for grinding nuts, seeds and cereals. The manufacturer even laid out a roller on YouTube, where this machine crushes rice. What is characteristic - the grinding goes in the very rough mode =) Otherwise, the machine simply shuts up - checked by me.
In summary: for the coffee grind is very coarse; for nuts, seeds and cereals, a coarse grinding of 1-1.5 mm would be acceptable, but the machine in this mode does not take these products, shuts up. As a result - super coarse grinding - 3-4mm. Where to adapt it, I did not understand. Even for grain bread, the grinding is very coarse. The only plus is really quiet, because The engine revs slump heavily under load and it doesn’t howl as much as the rotary ones. My copy is generally silent, because now stands on the shelf without work =)
PS: for the purpose of super-grinding, you can buy any millstone grinder in this price category: knives, gap and motor are all the same. I overpaid three times: instead of 600r I bought for 1800r: thanks to the distributor for the warm feedback =)
Apukhtin Alexey, 2014-09-19 Evaluation 1
Video review grinder VITEK VT-1548
