Cooler Master Hyper 212 EVO

Advantages: very quiet. AMD FX-8250 at a simple temperature of 38 degrees.

Disadvantages: the fan boomed after 5 months of work. True computer was turned on around the clock

Comment: everything would be fine, but the fan failed

Advantages: Quiet, productive, easy to install, normally retracts into the case.

Disadvantages: Not found.

Comment: Very quiet cooler, cools the six-core amd 6350 almost soundlessly. The temperature of the processor does not rise above 60 at the highest loads, mainly held at 45-48 degrees at the speed of the cooler by 45%.

Advantages: Silent, effective, got into the 18 centimeter body.

Disadvantages: I have not yet seen

Comment: I took for AMD FX-8350 4.0 GHz. At idle 35 degrees, under load (video miscalculation) 60-65 degrees, the stress test in S & M at a 100% load peak temperature showed 71 degrees. Before him, Katana4 was unable to cope with the task, under the load, the computer simply cut down from overheating, so I had to change the CoolerMaster Hyper 212 EVO.

Advantages: 1. Quiet
2. Cools well
3. Everything you need in the box
4. Vertical and horizontal installation.

Disadvantages: Not found

Comment: Housing Zalman Z9 u3 - entered without problems. There are attachments under the 2nd propeller. It is installed both horizontally and vertically, but in a horizontal position the RAM is needed without a high radiator and it is better to install it in the dimm 2 and dimm 4 slots (I have mother GIGABYTE GA-990XA-UD3) Mounts securely. AMD FX-4170 processor 4.2-4.3 Ghz maximum temperature in heavy games 54 degrees.
All successful builds.

Advantages: The first advantage is silence, and in truth, I really want to look under the cover of the case to find out if it works at all.

The second is the excellent cooling of the warmest processor from AMD, this is the AMD FX-4100, this is the furnace of all the furnaces; on the old cooler under 90% -100% load, the temperature was +70 - 80 Degree (and this he heated to this temperature for some -6 minutes), now on the already new cooler with the same 100% load, the temperature is 55 (and this is already 30 minutes maximum load) and the temperature will most likely not be higher, except up to 57 degrees.

The third advantage is the ability to replace the fan on the cooler, if something happens to it, or to add another one, in which I see no reason as one is enough too.

The fourth virtue is excellent thermal grease in the kit, I was surprised.

Disadvantages: In order to install the cooler, I will unscrew the motherboard, I will not tell in details.

Comment: In general, the purchase is very pleased, excellent thermal grease in the kit, silence, cool perfectly, thank God that the body got in, not everyone is given)))

Advantages: 1) Price!
2) Pretty quiet.Very happy.
3) Cools as needed

Disadvantages: did not notice.

Comment: It costs about three years. Brush regularly from dust.


It is on i7 920, if by default (2.6) then in idle about 30 it was. in load not higher than 55.

I tried to raise it to 3.8 GHz, it is no longer enough, in the prime to 86 the temperature rose.

Now at 3.6, in the prime around 65-75. In games much less. 55-60.

I advise! Cool, PC 24/7 running, no problems at all time.

Advantages: A thing, in the truest sense of the word)) I bought it, set it, set the momentum in the BIOS and forgot it)) Silence and comfort)
Cooled hot processors up to 140W, Phenom, FX, i5 / i7 will cool without thinking.

Disadvantages: In the narrow case will not enter. It is advisable to take the body 20cm

Comment: The Intel Core i7-2600K processor, cools perfectly (28 in idle, 40 max that is heated) what else is needed.

Advantages: Noiseless, at low speeds sometimes you want to look into the system unit and make sure that it works. Cooling, though my stone is not the hottest (Athlon II X2 without overclocking), but even with the toughest tests the temperature did not rise above 38 degrees (with the old boxed propeller the temperature reached 50). It is a completely sane installation, which even a novice geek can figure out, of course, the motherboard will have to be removed, but in the future - everything is quite simple and logical, and there is video on the Internet (how to do it). A very good and well-thought-out radiator with copper pipes, even in the passive (although there are still three propellers in the case) copes, there is also the possibility of installing a second fan. Completion and price - and if the first one is happy with its adequacy (everything you need to have in the kit, you did not forget to even put a tube with decent paste), then the second one doesn’t afford much, 1000 tugriks are quite reasonable money for such quality.

Disadvantages: A large radiator will not fit into each case. Tugging screws - male hands are desirable during assembly. No backlight.

Comment: There was a choice - Zalman CNPS10X Performa VS Cooler Master Hyper 212 EVO! I chose long and carefully, as a result, Cooler Master won out (it works quieter, a better processed base and, as I said, it’s quite a reasonable price).

Advantages: The first is of course the price. I took for 1200 and have never regretted. Ability to install an additional fan. A really quiet cooler. In the daytime, it’s not audible at all. Only in complete silence can you hear a light, non-tense fan.

Disadvantages: A tricky installation, but this is for me. For experienced ones, the installation will not cause problems, because I first put such a cooling plan. There are shaky fasteners, where the fastening of screws is broken. The usual glue of the moment helped.

Comment: Excellent cooling. I used to replace a standard boxed cooler from AMD FX 4100 with a 95 W heat dissipation. With a regular cooler, the temperature at rest was kept at about 50, and at a load it rose to a critical 70 seconds.
Putting Cooler Master, the temperature dropped to 40 at rest, and up to 50 under load. And by putting an additional cooler, the temperature dropped by another 6 and 4 degrees at rest and load, respectively. In all cases, the temperature was measured by AIDA 64 and SpeedFan programs

Advantages: Price (took for 1000), characteristics, PWM

Disadvantages: I had to remove the side fan, although this is also a plus as there was less noise.

Comment: He took for cooling the Phenom X6 1090T, the boxed cooler is very noisy. The result is a temperature in idle 30-33 C, under load LinX 45-55 C, only Prime95 could warm it to 61 C, in BF3 it does not rise above 48. I am satisfied with the purchase, I advise everyone.