Deepcool Lucifer V2

Advantages: An excellent cooler for your money, my Amd FX-8320 overclocked to 4.5 GHz at a voltage of 1.47500 gives 57 degrees under load, this is under stress test, 100% load of the processor.

Disadvantages: Need a long screwdriver to install, but I managed with pliers

Comment: Very beautiful, box, everything neatly, immediately felt that he was worth the money.

Advantages: very good cooling (FX-9370 4400-4700)
30-50 degrees

Disadvantages: (Installation of the bug is heavy) is not a minus for me xD but you need a long Phillips screwdriver.

Comment: Super after a small setting of the speed of the cooler, the temperature at 8 core
did not exceed 64 degrees (64 degrees at a load of 90 +%).
205x527x564 was enough with a small stock.
(205 key size)

Advantages: + Installation is no more difficult than any tower cooler
+ Nice view
+ Very quiet, perhaps it is not the fan’s merit, but CO as a whole. The reason line below)
+ The most important plus is the "extreme" cooling.

Disadvantages: Not yet found

Comment: AMD FC 8320 overclocked to 4.5 GHz, standard voltage
Stress test Aida64: 15 minutes at 100% CPU load
After 3-4 minutes from the beginning of the test, the processor temperature froze at around 52 degrees and remained so until the end. And while it is completely inaudible.
My joy has no limits!
I studied reviews for various coolers for a long time, and despite the not very good results of this model for the tests, I chose it. I do not regret the purchase!

Advantages: The installation is relatively simple, I think that my hands are growing from the wrong place, but the installation did not cause me any particular problems.
Kuller showed himself perfectly in passive mode.

Disadvantages: The kit does not have a long thin screwdriver, without it it will be very difficult to install the radiator.
The quality of the base could be better, although the reflection is specular, but traces of the cutter are visible.
Aluminum plastics are strung on each other, not soldered, which is not very good.
Copper tubes are poorly distributed around the radiator area.

Comment: The i7 3770 processor, scalped, works in stock. Due to strips with high radiators, the fan initially set to blowing, conducting tests found that at high revolutions of the cooler, the radiator produces a metallic bounce, the effect is that the plates are strung rather than soldered. I wanted to walk along the perimeters of the mounting plates with alsil-5, but I never found a store in which this glue was not dried.

I found that the fan speed practically does not affect the CPU temperature (2-3 degrees of difference), since the cooler positions itself as passive cooling (the case is large and well blown, below 140 for blowing, from above 200ka for blowing), I decided to try to remove the fan from the radiator, hung it on the back wall of the case (I used to have a fan on the back wall, but from - for this cooler it had to be removed, 2 fans simply did not fit), and the 4pin connector was pushed from the cpu fan to fan1.
5 minutes loaded percent to maximum, the result is 60 degrees, after stopping the load, for 10 seconds it drops to 40. Now it left in the passive mode, it showed itself perfectly in this role, for this processor in the blown case.

Advantages: excellent value for money (2050 rubles on February 3, 2015)
quiet at the minimum speed (300) this is the main difference from version v1
suitable for all types of sockets

Disadvantages: spinner closes two RAM slots
not up to the top, such as Noctua d14
not included long screwdriver for pressure screw, inconvenient to tighten

Comment: for their money, chic cool, large radiator, high-quality spinner with low minimum revolutions (300 RPM), quality at SilverArrow IB-E, only the price is 3 times less, at idle temperature at 28-29 costs (i5-4690K) .