DeWALT DWE4215

Advantages: Low noise, well in hand (can be cut with one hand), powerful

Disadvantages: No suitcase for storing grinders and accessories, handle and protective cover are not interchangeable with previous models

Comment: I bought 28130 instead of the dead one, I was pleasantly surprised by the smaller noise and vibrations compared to the previous angle grinder, the powerful Bulgarian can put a larger diameter disk, but because of the new seat under the protective cover you cannot put a casing from 150 or 180 old design. The handle of the "anti-vibration" is only the name, the 28130 is much better, but the diameter of the thread has increased and replacement is not possible. NO suitcase where disks \ crowns \ etc. would be stored Hexagon instead of a key for an amateur (took the key from the old one) In general, I liked the tool. recommend.

Advantages: Reliable, comfortable workhorse, sawn-sawn on several construction sites. When biting a disc, the rebound is easily extinguished by the hands. Vibration is not strong, and given the small weight - hands do not get tired during long-term work, compact dimensions - it is convenient to climb into "uncomfortable" places.
Another of the advantages of the cable is quite long and not "tanning" in the cold.

Disadvantages: current prices are slightly upset, but they will pay off the reliability of the grinder.

Comment: Many years ago, an older model was purchased, which to this day works in profile cutting, pipes (small diameter), polishing and polishing metals, concrete, and wood.

Advantages: Powerful, reliable and indestructible.

Disadvantages: Honestly, I didn’t really understand about the anti-vibration pen, because there are other companies where it is more accurate - anti-vibration. And the application of simple rubber on plastic ... doubts about this know-how (although there is trust, and that should be so :)).

Comment: There was a time when I thought that by buying cheap angle grinders, you could both eat the fish and get around the chair. On one "fine" day, when cutting thin-walled concrete slabs, I personally burned two (!) Bulgarians in FIG. And one of them worked on construction projects of about 4 years (it was reliable, tested with fire and water), and the other - a new one, literally a couple of months old). They offered a lot of things in stores. But there was already an understanding: if you want to work normally, buy a normal tool with the characteristics for this job. A clear disgust for Bosch, Hilty, etc. Especially Hilty distinguished himself: when working at a large object, there was a lot of this tool and a specialist from Hilti every day took shuriks, perfy, now chippers for repair. In general, in terms of price, build quality, and so on, the plugs are completely filled with engines and a system for cleaning dust and dirt (by the way, it really works with a bang!), Ease of holding and on / off buttons (here you’re talking: the button is just song!), the choice fell on the angle mill DeWolt. While 2 weeks of everyday work. Not the slightest sign of dust getting into the engine. Well, there’s nothing to say about cutting metal — how oil cuts.

Advantages: power
reliability
practicality

Disadvantages: noisy

Comment: # The model that I purchased is no longer produced D 28134, this one is almost the same, differing only in power + 100W and energy-absorbing handle. I've been using it for 10 years, I only have brushes and lubricant in the gearbox.there is a slight vibration due to a broken tooth on the gear, I use very often, cutting metal, porcelain stoneware, grooves in concrete. I think this younger brother is not worse than mine. recommend.

Advantages: Powerful enough. Took a pair (in case of repair) to Makit 9565CV. The tool without frills, such as soft start and adjustment of turns. In principle, for those tasks - cutting and cleaning works on metal, this machine is still completely satisfactory for me. It seemed quite convenient to replace the disk with a 6-sided key - the key takes up much less space and weighs less, and to replace the disk with a 125 mm machine, the effort is enough to push the nut. I also liked the casing with the ratchet - no need to make any manipulations when changing its position.

Disadvantages: Not yet revealed, well, except that the network cable could be made longer and out of the nonfreezing rubber.

Comment: It is a normal device without additional bells and whistles. Let's see how justified is the opinion that DeWalt grinders are one of the most reliable. ;-)