Ratings Selection New technologies Reviews

"Geyser 1P ½"

detailed information
9.6 / 10
Rating
A place:

Characteristics "Geyser 1P ½"

Main characteristics
Device type filter
Filter type prefilter
Water connection there is
The number of cleaning steps 1
Using for cold water
physical characteristics
Filter module included not
Pump to increase pressure not
Storage capacity not
Recommended performance 10 l / min
Top performance 15 l / min
Inlet water temperature up to 40 ° C
Inlet pressure up to 7 atm.
Connection size 1/2"
Dimensions (WxHxD) 13x35x13 cm
Additional Information
Filter module replacement calendar not
Features case material - plastic, case type - Slim Line 10 ", cold water purification from suspended particles (rust, sand and other insoluble impurities), the degree of purification and filter performance is determined by the installed cartridge: sedimentary or Geyser cartridge

Reviews of "Geyser 1P ½"

Evaluation 5
Advantages: Easy installation and maintenance
Disadvantages: not found
Comment: The filter decided to install 8 months ago after replacing the water heater when I saw that the water heater inside was 1/4 full of rust, which was the reason for its complete failure. I had to buy a new water heater. Plus, I bought a washing machine and decided to definitely install a filter. The filter itself was installed without any problems. In the toilet immediately after the counters I cut the metal-plastic pipe and screwed the filter. In the toilet cistern tank, in the toilet and on the bathroom a rust buildup had formed in 3-4 days. Now it's over, everything is absolutely white (sterile). But as a filter element, I installed a replaceable element from Atoll MP-1B, since it has the thinnest degree of cleaning - 1 micron. All other manufacturers up to 5 microns. Replaceable filter element becomes dirty with our water pretty quickly - in 3 months it is already completely red. My flask, unlike the one on the photo in the Yandex Market, is made of transparent glass, so the contamination of the replaceable element is clearly visible. 2 times I have already changed the replaceable element, well, very simply, literally in 5 minutes, I unscrewed and took out the old one, inserted a new one and screwed the flask in place. It is worth the replacement filter 105 rubles, so it is absolutely not expensive. Personally, I really like the filter and I definitely recommend it.
Karat Aleksey January 8, 2015, Permian \ Experience: several months
Evaluation 4
Advantages: Well, just everything, screwed and hangs himself, filters.
Disadvantages: Be careful when changing the filter.
Comment: I changed the liner a couple of times .. you need to carefully and firmly hold the mount. so as not to break it. Periodically glancing at clogging, especially after the repair work on the house by mechanics. Those can score in a month.
I use the thinnest 5 microns.
December 23, 2012 \ Experience: several months
Evaluation 4
Advantages: carving for washing machines, no need to come up with adapters
Disadvantages: Plastic mounting bracket, if desired, can be broken
Comment: Due to the weak pressure of cold water, after installing the filter, the washing machine began to fill up much longer.
December 02, 2012 \ Experience: less than a month
Evaluation 5
Advantages: I put a barrier under the sink in front of the triple filter, in general I put it myself easily and the filter is from dirt, it copes well with it. Put that would keep the system clean longer.
Disadvantages: not
Comment: I advise everyone, I think such to the country to put on iron
stas.andro2010 September 08, 2010 \ Experience: less than a month
Evaluation 4
Advantages: The filter is quite successful. I use the week. I have a lot of rust in the water (iron) from old pipes. He copes well. The water comes out clean, odorless.The installation also no problems. Connect through 1/2 "flexible hoses.
Disadvantages: Perhaps the main drawback in mounting the filter, allowing it to be screwed to the wall. It is plastic and covers the top of the filter cover. It is fastened by four bolts to the cover. And the inconvenience is that when you change the filter, you will first need to unscrew these 4 bolts from the mount, and then unwind the filter. Otherwise, just break the mount. Do not stand the plastic load. A metal mount would be better.
ant.al888 March 23, 2010 \ Experience: less than a month
"Geyser 1P ½" is selected in the rating:
Top 20 water filters

Ratings

Selection

New technologies