Ratings Selection New technologies Reviews

HDX F 5 BMS

detailed information

HDX F 5 BMS Specifications

General characteristics
Type of Internal combustion engine
Power 5 hp, 3600 W
Maximum engine speed 5000 rpm
Transom S, 381 mm
Control tiller
Internal combustion engine
Engine type four stroke
Number of cylinders 1
Working volume 112 cu. cm
Bore 59 mm
Piston stroke 41 mm
Gearbox 2.08:1
Launch manual
Grease type mixture
Cooling water
Fuel tank built-in, 1.3 l
Broadcast forward-back-neutral
Fuel supply system carburetor
Electronic ignition system there is
Fuel type AI92
Design
Motor lift manual
Adjusting the angle of the motor there is
Number of propeller blades 3
Engine emergency switch there is
Dimensions (WxHxD) 361x1029x717 mm
Weight 24.5 kg
Additional Information exhaust system through the screw, rev limiter

HDX F 5 BMS Reviews

Evaluation 5
Advantages: Light. New. start up easy. Simple as two fingers. Convenient to maintain. Economical at the stage of running-in without load (it will be seen later). Pretty good build quality and color. Very quiet for the sound of work.
Disadvantages: The problem is to drain the gasoline from the built-in tank for transportation over long distances. The scale of increase in power on the tiller is done in the opposite direction,. the scale is set to the shortest mark on a 100% open damper, and the longest mark at idle.
Comment: Bought new. Running in the first hour at 50% power made in a barrel. In the near future I will roll in open water.
5 hours of operation on the river: Used on a 2.8 m long Arsenal boat. Planing is only possible if there are 1 person in the boat. Together at maximum speed floats, but very slowly. Differential motor for 2 positions. Start with a closed valve only absolutely cold engine. Further (even after 2-3 hours of inactivity) - only from the open.
asimmo77 July 08, 2015, Kirov \ Experience: several months
HDX F 5 BMS is selected to the rating:
Top 20 outboard motors

Ratings

Selection

New technologies