Kospel EKCO. L2 12

Description of the boiler Kospel EKCO.L2 12:

• Electric boilers Kospel EKCO.L2 can be an independent source of heat or work together with other boilers as a backup source.

• Boiler Kospel EKCO.L212 reacts quickly to temperature changes using a 6-step power control system, provides significant energy savings.

• The power unit consists of electronic semiconductor elements of inclusion, ensures reliable and silent operation of the boiler Kospel EKCO.L212.

• A thermal switch turns off the power supply in case of an emergency. Protects the heating unit and electronic components of the boiler Kospel EKCO.L212 from failure.

• The open arrangement in the housing of the electronic control board of the boiler provides ease of its maintenance and replacement.

• Low investment cost of the boiler Kospel EKCO.L212 promotes its use in places where there is no gas wiring or in buildings used only periodically, for example. in the country.

• Ideal for installation in places where there is no possibility of building a chimney, for example. monuments of architecture.

• It is also an ideal solution in places where due to safety requirements it is forbidden to use open fire, for example. gas station.

• Must be used before the boiler Kospel EKCO.L212 differential shutdown device (RCD) to ensure safe operation.

• Must be used before the boiler Kospel EKCO.L212 Voltage stabilization or safety device for protecting the electronics of the control board.

• It is necessary to use a strainer with a magnetic liner on the coolant input to the boiler.

Automatic boiler Kospel EKCO.L2 12:

• Boiler control Kospel carried out using the room controller, which allows you to program different operating modes at different times of the day.

• The control panel provides installation and viewing of boiler operating parameters. Provides automatic selection of power mode, which significantly affects the economy of electricity consumption. Provides adjustment of the temperature of the coolant in the range from 40oC to 85oC.

• Automatic step adjustment of power of a copper Kospel EKCO.L2.

• System of protection of the pump in the boiler Kospel EKCO.L212 from blocking.

• The degree of protection of electrical equipment is IP21.

• Control of the heat carrier flow in the boiler Kospel EKCO.L212.

• Turbine sensor duct coolant.

• Built-in pressure gauge.

• Safety valve - 0.3 MPa.

• Automatic air vent.

Application:

• Boiler Kospel EKCO.L2 it is intended for work in heating systems and collaboration with a boiler of indirect heating.

• The use of appropriate management will provide high thermal comfort of use and the possibility of choosing individual modes of operation.

• Heating unit and heating elements in the boiler Kospel EKCO.L2 Made of high quality stainless steel.

• The boiler should be stored in a dry room at a temperature of 5 ÷ 35 ° C.

• Boiler Kospel EKCO.L212 reacts quickly to temperature changes using a 6-step power control system, provides significant energy savings.

Boiler Specifications Kospel EKCO.L2 12:

• Rated power - 12 kW

• Rated voltage - 380 V

• Outlet temperature - 20-80 С °

• Efficiency - 99.4%

• Size of VhShhG - 710x418x251

• Weight - 18 kg

• Connection pipes - 1/2 "

• Approximate heating area - 100-140 m²

• The volume of water in the boiler - 1.5 liters

Components of the electric boiler Kospel EKCO.L2 12:

• Mounting screws - 2 pcs.

• Magnetic filter for installation in heating wiring F-MAG 1 "- 1 pc.

• List of authorized service centers - 1 pc.

• Electronic room week programmer Auraton 2005 - 1 pc.

• Technical documentation (warranty card) - 1 pc.