Resanta SAIP-200

Advantages: The quality and purity of the arc, current adjustment.

Disadvantages: I did not see.

Comment: Reliable welding machine, I work with it every day in my car repair shop. Smooth and clean arc, without sticking, high-quality seam. Like setting the welding current, you can adjust to any thickness of metal. The kit has everything you need to start work right away: cable, burner, ground terminal.

Advantages: A good machine compared to other old welds, lightweight, comfortable, non-flammable, and of course it cooks well.

Disadvantages: Current adjustment

Comment: Recommend

Advantages: High-quality seam, overheating protection

Disadvantages: Not found

Comment: Bought to work with the body elements of the car. Cooked with our wire 0.8mm. Leaves a beautiful, thin seam, the wire feed speed and current is adjustable. Worked with this unit from morning to evening, with short breaks, never overheated, the cooler performs its function. The most important thing is that power surges do not affect the work. For the year from the apparatus only positive emotions.

Advantages: well cooks thin metal, does not burn

Disadvantages: well cooks thin metal, does not burn

Comment: My first semi-automatic after the arc, got used for several days. So strove to tap the wire at the weld. He trained on a flux wire - the seam is disgusting, although at least you can cook. Bought a cylinder with a mixture, gear, hoses and the process has begun! Beauty and not a seam, not worse than the factory!

Advantages: Powerful, durable brand, removable burner

Disadvantages: It consumes a lot, requires a good line of at least 2.5 sq. Mm of copper

Comment: Hesitated between 165 and 200 SAIP, nevertheless decided that the current margin of the pocket does not pull, today it does not seem to be needed, but tomorrow it will be needed and you will not add amps. Metal five cooks with a bang, welded the gate to the garage and box for them. The only thing - at high currents home wiring could not stand, all the same 6-7 kilowatt he takes, as well as a song.

Advantages: pulls the wire 1mm. operates at reduced voltage.

Disadvantages: weight.

Comment: With p / a work in the garage on the car body went to another level. Worked with current 190A 10-15min burn up the burner is not overheated. Second month It works without problems. (2-2.5 hours per day) I recommend.

Advantages: Removable torch and eurosocket, reliability, long work on thick metal

Disadvantages: It is necessary to lengthen the mass, ideally twice.

Comment: Perfectly proved on welding of pipes and a profile for a country fence. I cooked them almost the whole day, with some smoke breaks, the protection never worked. Provar metal is good, even with self-protective wire, the seam is normal. And all this in the country, where the voltage is more than modest, can drop to 160 volts. All the same, the inverter against the rectifier wins noticeably! I will check on thin metal closer to the middle of spring.