Specifications
| General characteristics | |
|---|---|
| Machine type | corner |
| Power consumption | 720 W |
| Max. disk speed | 11,000 rpm |
| Max. disc diameter | 125 mm |
| Spindle thread | M14 |
| Nutrition | from the network |
| Functions and features | |
| Opportunities | spindle lock, power button lock |
| Additional handle | there is |
| Power cable length | 2.5 m |
| Length | 266 mm |
| Weight | 1.4 kg |
Reviews about the Bulgarian Makita GA5030
Virtues
- Small, comfortable in the hand, the power is enough for 3 mm. metal.
disadvantages
- Inconvenient inclusion by thumb. Well, not because of the finger of course, but the fact that the switch is a slider (but with a lock). IMHO button would be more comfortable.
- P.S. while writing a review, almost got used to inclusion))
Comment
Like everything else, Makitovskoye is more pleasing than upsetting. True, when I bought, the switch was on the bottom (or under the left-handed). Unscrew the 4 bolts, and without removing the gearbox turned it 180.
Anonim 2012-02-27 Evaluation 5
Virtues
- Light, small, comfortable, relatively quiet, excellent quality, long wire is also a plus.
disadvantages
- There is no case, but you can buy separately. Price in the district 350r. There are no more minuses, except that they can't cook :)
Comment
Chose between models makita: 9555,9558,5030 and other manufacturers. In the store, he picked up the ga5030 and did not want to release it. I understood that it was mine. It was easy, very, and VERY comfortable enough that I consider important for this size. I doubted power (720 watts) because. I took it not only for grinding, and in vain I worried. It gnaws everything with great pleasure.
This is my first ushm. I will take the second one at 230, for rough work (I think it will be interskol).
For jewelry work I advise everyone to GA5030. It will please you !!!
vanchelaRUS, 2013-03-17 Evaluation 5
Virtues
- It is quite thin and therefore fits comfortably in the hand without the sensation of palen, the switch is conveniently located - under the thumb. Pretty quiet. Build quality.
disadvantages
- Perhaps only the price, but this quality should still be valued a little higher.
Comment
I took it not for myself, as a gift ... and I already envy this person :). I would take this one myself.
kval, 2011-04-26 Evaluation 5
Virtues
- After 3 years of work, I disassembled to look at the brushes, and they are almost half erased!
disadvantages
- The main thing to use correctly!
Comment
Many times he was subjected to various tests; praise to the Creator, he never failed to let him down, because I didn’t cut them ... nEven the two-Tauri of the 20th! etc ... n In general, take it will not regret !!! nBy itself about 750 times!
Isaev Husayn, 2014-08-08 Evaluation 5
Virtues
- Small and comfortable. I use year. no complaints. some say looking at her that little power, it all depends on what to do. I use for cutting ceramic tiles. if you cut in large quantities of metal, then you need a more powerful course, and so it is quite enough. More convenient options are not met, since a small girth of the handle
- Works since 2009. I changed the set of brushes twice, a year ago I replaced all the bearings, I don’t consider it a drawback. I bought the second one for the stock, there were several objects, so as not to burden. The first one has a convenient button switching design, the second one doesn’t have to push the button before moving forward.
- for all the time it is more convenient than the grinder
disadvantages
Comment
maks1m1, 2014-09-13 Evaluation 5
Virtues
- Easy Comfortable. Silent. Does not vibrate (no imbalance, well centered)
disadvantages
Comment
I use not long, about 3 months, it is three months of happiness! Cuts as smoothly as if you were cutting butter, holding one’s pleasure in your hands, plastic is pleasant. TAKE! DO NOT WISH! Before that there was FERM FAG-125 (it worked for more than 3 years, but the bearings and the bronze bushing often flew to see poorly centered. The end came - the bearing stuck and melted the saddle, the body doesn’t change to sense)
Jobs steve 2013-10-29 Evaluation 5
Video review of angle grinders Makita GA5030
(review and test)
