Specifications
| General characteristics | |
|---|---|
| Purpose | drill |
| Tool type | shock |
| Type of cartridge | quick clamping |
| Number of speeds | 1 |
| Nutrition | from the network |
| Chuck diameter | 13 mm |
| Max. idle speed | 2900 rpm |
| Power consumption | 550 watts |
| Max. drilling diameter (metal) | 13 mm |
| Max. drilling diameter (concrete) | 16 mm |
| Functions and features | |
| Modes of operation | blow drilling |
| Opportunities | reverse, electronic speed control |
| Additional Information | |
| Adaptations | additional handle, drilling depth limiter |
| Weight | 1.6 kg |
| Equipment | 1 depth gauge, 1 side handle |
Reviews of Hitachi FDV16VB2 drill
Virtues
- Perhaps the most convenient and high-quality case from all the drills I have tried, the price also pleases
disadvantages
- The fixation of the drill in the chuck is rather bad; change, rejoice noiseless.
Comment
I have been using this drill for 5 years, I have drilled reinforced concrete walls with a drill and a crown of 60 mm, about 30 holes for sockets, the concrete was in the way with a mixer, there were no breakages.
thenightflyer 2012-11-06 Evaluation 5
Virtues
- Very ergonomic, high-quality materials, keyless chuck, very convenient case with a pocket for instructions!
disadvantages
- When drilling concrete (with a punch) it is sometimes wedged, and it is extremely difficult to open it with your hands. to take out the drill! And some time is spent on its extraction! Then once - quietly opened .. as if the tension had subsided!
- After 2 lech absolutely NOT serious exploitation - the rheostat stopped working - which regulates the speed! Very unpleasant moment! Apparently worn in the trigger track, because if the trigger is rejected down or up, then you can run the drill as smoothly as after the purchase!
Comment
In general, a good product, from the eminent manufacturer! For the house it is! Well, why do you have at home a real puncher for 4-5 thousand rubles with a blow force greater than 2g? And this is an ordinary impact drill, light and comfortable, and in just 2 rubles, which will quietly pass brick and concrete for hanging the cornice, and also will work as a screwdriver for assembling furniture! If there was no problem with the trigger, I would definitely advise it! But maybe it was not lucky my copy?
zaitsev-ton, 2010-12-15 Evaluation 4
Virtues
- - High quality materials and assembly. One of the best or even the best in these parameters from what he saw and held in his hands (in his weight category). Rubber grip and almost the entire body.
- - It is very comfortable in the hand - it is convenient to work
- - Floating speed adjustment during drilling with the help of just pressing the start button (plus, you can also adjust the wheel on the start button)
- - Well-centered chuck - even with a long drill (if the drill is not curved =))
- - quite decent case included
disadvantages
- not found
Comment
First impressions are very positive. Very good and high-quality tool, which is convenient to work, and just nice to hold in their hands. I got it for repair and further home use, so I cannot tell about the resource under professional workloads.
Some complain that the drill in the chuck is not sufficiently loaded under heavy loads - BUT THEN QUESTION: why did you take a quick-load cartridge ??? I here consciously took the keyless chuck for speed and convenience, since for work under heavy loads I have a punch. If there were no perforator, then most likely he would have taken the same one, but with a key chuck. Or even that the thread is more powerful. But this is the case if it were necessary to take one instrument instead of two. Although the function of a jackhammer is not replaced by a drill.
krispear dispear, 2013-04-24 Evaluation 5
Virtues
- Price, quality and comfortable housing.
disadvantages
- The cartridge is very weak, it has become wedged, it’s hard not to unwind. Replaced by Makitovsky and everything was fine.
Comment
Convenient drill for home, for light work.
Anonim 2010-07-07 Evaluation 3
Virtues
- Ergonomic design, lightweight, you can work with one hand and does not get tired.
disadvantages
- The disgusting cartridge, when jamming the drill, immediately spins, you have to constantly tighten. This is due to the fact that the manufacturer for the sake of price reduction puts the simplest, cheapest cartridge without a retainer.
Comment
When buying, I advise you to buy a cartridge with a retainer, it costs about 800 rubles. on the market and replace the regular one. And so quite a worthy tool.
Ageev Igor, 2013-12-16 Evaluation 4
Virtues
- Compact, lightweight, easy to handle
disadvantages
- Significant not yet seen
Comment
A convenient, lightweight drill, I hope that there will be a reliable one ... at least a Hitachi screwdriver serves for a long time, because of this, the drill took on this company. I liked both the outward appearance and the convenient fast-clamping cartridge and the fact that the kit includes a case of sufficiently large volume, where every small thing will fit. From minor flaws ... at least for me ... it’s a little hard cord and a button, first when you press it, the speed changes smoothly, then a bit of a sharp drop on high revs, well, maybe this is what I got.
Saveliev Vyacheslav, 2014-02-25 Evaluation 5
Video review drill Hitachi FDV16VB2
