Specifications
| General characteristics | |
|---|---|
| Purpose | drill |
| Tool type | unstressed |
| Type of cartridge | key |
| Number of speeds | 1 |
| Nutrition | from the network |
| Chuck diameter | 16 mm |
| Max. idle speed | 550 rpm |
| Power consumption | 1050 W |
| Max. drilling diameter (wood) | 35 mm |
| Max. drilling diameter (metal) | 16 mm |
| Functions and features | |
| Mixer | there is |
| Opportunities | reverse electronic overload protection |
| Additional Information | |
| Adaptations | additional handle |
| Weight | 3.8 kg |
Reviews about the drill Interskol D-1050R
Virtues
- The tool is similar in characteristics to the good old Soviet low-speed drills that drilled everything and everyone ...
disadvantages
- The ability to instantly change the direction of rotation.
Comment
After a long search, I got this device after I had a high-speed Dutch FERM died in my hands because of my own fault. I tried to drill a 20-mm log into a 30-mm drill bit with a drill.
To learn from mistakes THIS LOW-CURRENT
In my opinion, INTERSKOL doesn’t care what kind of drill and what kind of material I have been working in their house for the 3rd year already
He drilled a 60-centimeter drill for a tree with a diameter of 20 mm with a hexagonal shank a hole in the house under the gander for wiring .. this is a 32 mm board, followed by a log of 20 cm ... and a board 40 mm behind the log
This whole sandwich drill pierced ... I did not have time to start counting seconds.
When repairing the bath with the same half-meter drill, he uprooted the lower rims of rotted aspen ..., and this is already 25-30 cm in some places of the still living tree ..
With this work, the drill does not heat up, it just threshes quietly and does its job. There is one problem .... if the hands are intended only for a touchscreen phone, better take a high-speed, lightweight tool.
This drill does not forgive mistakes. The joints will be pulled out if you sleep or dream while working.
They write about the small size and frivolous size of the trigger lock of the drill .... (this is more likely for those who are hampered by this concrete ... with which I am sure it will cope)
for me .. so I wouldn’t do this release at all when the trigger was released would help keep my hands ... it was in my paws once twisted so .... I remembered all my life.
We undertook to build a house and take it boldly for this tool.
Do not hesitate at least once a year to open the gearbox to remove the old grease ..wash with gasoline and stuff Litola on gears ... and buy spare electric brushes at once ... 100 rub. couple (they probably are everywhere)
The device is powerful ... electric brushes for it consumables .. Good luck in your work!
protsevitiy, 2013-03-25 Evaluation 5
Virtues
- Huge torque. Excellent ergonomics. Reverse.
disadvantages
- The trigger lock is very unobvious and non-functional. Switching to reverse is stupidly implemented.
Comment
For mixes, the best tool I've ever used. (I actually bought it for this purpose) Even more convenient than specialized mixers. He does not care what to twist, and empty water, and semi-dry cement mixture - the speed of rotation is unchanged. It does not require titanic efforts to keep him in his hands. In addition, we get a powerful low-speed drill. Sometimes I use for drilling.
Not for wimps. The machine is heavy and powerful. You need to be careful when drilling. If the work tool is stuck, it can also wind the operator around him. No fool protection. Forward-reverse rotation of different positions of one button is turned on, there is no switch, like the usual drills, screwdrivers, perforators. If, before the spindle is completely stopped, it switches to reverse (and this is done in a fraction of a second with one finger movement), in the guts it begins to terribly sparks, pops and stinks with burning insulation. It is easy by stupidity to burn the engine.
However, its advantages outweigh the disadvantages.Which, in general, and not flaws, and especially the operation of the tool.
andr1205, 2012-02-11 Evaluation 4
Virtues
- Powerful. A huge torque moment.
- She does not care what to interfere - even concrete, anything. It starts without problems with a mixer in the solution. If the solution does not interfere, it will spin the whole bucket.
- Ergonomic.
- Solid and reliable mechanics and dviglo.
- Reverse.
disadvantages
- Very quickly broke the trigger lock. I have forgiven this little muck for my beloved company - it does not interfere with work, okay; although unpleasant. I didn’t want to carry the guarantee because of the little things.
Comment
Ideal for kneading.
Great for reaming large holes. Ballerinas all sorts and other exotic.
But be careful: 1050 W dope at low revs is not a joke. When I drilled a bolt hole in the steel corner, that moment, when the drill was stuck, I almost didn’t lift my hands :) It’s better for fragile girls not to take :)
At the time of repair from the brother, he gave him a loan, so he liked it and he bought it from me. I naturally went to the store for a new one right away. He, by the way, is also pleased.
jacku79, 2010-07-03 Evaluation 5
Virtues
- Powerful.Very (for home)
- Quality made
- Available in price.
- Ergonomic.
- Reverse.
- Reliable.
disadvantages
- The reverse design is not quite convenient.
- Dr. not found.
Comment
Scrolls any mass at home and PTS ratio 4060 after an hour of inactivity, in a bucket and bring to ....
I liked her ergonomics.
On the button on the turner, my facing did not let the drill stop and on the reverse - there was a pop, (apparently burned on one side), but so far without comment.
Repair (with plastering, screed and tile installation) in the bathroom Khrushchovka
Very pleased with the tool.
chela50, 2011-12-22 Evaluation 5
Virtues
- Good torque.
disadvantages
- The drill chuck is attached to the gearbox shaft with a thread and secured with a cog size of 6. With frequent use of the reverse function, the screw breaks.
Comment
The drill is used to make holes in the bar for lambs (diameter 25). Cope with its function by 100%. It is necessary to be afraid of high torque during operation, as there is no safety clutch. Purely masculine tool. When working noticeable drawdown network.
Anonim 2012-08-23 Evaluation 4
Virtues
- Powerful.
- Cheap.
- Comfortable.
- Reliable.
- Unpretentious.
- Does not overheat.
disadvantages
- Did not reveal
Comment
Made with her repairs in the apartment completely from scratch. Used exclusively as a mixer. Knead in buckets of 30-50 liters at a time plaster / putty / tile glue / self-leveling floors and other solutions.
Never overheated, did not collapse in front of large volumes. If there is little water and the solution is not mixed, it turns the whole 50-kilogram bucket))
She worked in very Spartan conditions - and in the cold and covered in dust / dirt, etc. All uneasy. Naturally, after such tests, prevention is needed - replacement of the lubricant / brushes after which it will continue to plow) In general, happy as an elephant.
Pavel Sheremetyev, 2013-11-04 Evaluation 5
Video review drills Interskol D-1050R
