Interskol DSh-10 / 260E2

Advantages: adequate price, but in general a normal machine

Disadvantages: probably someone would find, I'm not picky

Comment: Bought a month ago. He made a garage for two cars from a profiled sheet. The cordless drill got out because of the constant recharging, because the professional sheet used it intended for the roofs of industrial buildings. Screws are long, strong timber. I tried the usual drill, how not to twist, then the initial speed is large, then the waist of the screw. The search for a network screwdriver led to an inexpensive LB-10 / 260E2 (Interskol). Bought for 1280 rubles. I do not know who the cord is short, in my length was 253 mm. the cord is thin, rubber sheath, what else is needed. The truth was that I had to design the clip myself, hang it on my pants, my jacket. Most likely this is the main drawback. Everything else works more than decently. The speed starts from zero, the tightening torque works under any screw. For the sake of checking the operation of the tool several times, I turned and twisted the screws with the head at 12 and 18 cm long (into the timber) without drilling. Cope in mode 15 (total 20). According to the mind for such screws, the place must be drilled. But as we all know, foolishly can and ..... break. There was no burning smell. So the garage is worth it, the tool is lying, waiting for the next job. Maybe he will not stand everyday work, but for the house is quite a normal tool.

Advantages: Price, ergonomics, small size

Disadvantages: Short cord, heats up and makes an unpleasant sound when working

Comment: I bought for 1200 r for the house. If there is an extension cord, one of the drawbacks can be crossed out.
Drilled a brick wall and tile in the bathroom. Screw furniture from chipboard. At the end of the work, he noticed that the device was significantly hot.

For the home - a good option.

Advantages: Low price, availability of ratchet for setting the torque, no expensive battery, two speeds, starting from scratch

Disadvantages: Heats up quickly and begins to smell like a burnt-out winding. As it is sometimes sometimes sparkle brushes. Short wire. No backlight.
In general, I had a battery shurik of the same company DA10-18ER. I worked for them at home during the repair of the month 3. During this time I did everything successfully and realized that I don’t need it anymore, because the batteries do not live for a long time anyway. And since it was still necessary to drill and twist furniture, it was necessary to find a replacement for wire. As a result, I went through the entire Yandex market, and was surprised by the lack of this niche. It turns out they almost no one does.

Comment: From all vylazilo not a lot of options: Interskol, Hummer, enkor, storm, Makita. Having climbed a couple of days on the Internet for all kinds of reviews, and chose a shock makita test. I ordered one in the store, came looking and bought it, and I realized that this was not it ... in general, there are no ratchets there, and it means that it is not suitable for home use! I had to continue the search for Shurik with a rattle.There also offered to see the Hummer. Honestly did not immediately lay down to him, I decided to read about him at home. Got home, read. One negative about damage. So there was little time left (the rechargeable shurik was already sold and a replacement is needed). So I chose Interskol, because they have more or less service with the service, and the reviews with the tests are good.
I bought for 1280r if I'm not mistaken. Brought home and let's test. I held it in my hand, it is sitting normally, moderately heavy. Twisted a couple of screws on 100mm, twists easily.
Later I had to disassemble the cabinet, which was assembled on some screws (I counted about 200 pieces). So I disassembled it in an hour! He himself did not believe it, but at the second speed the screws were unscrewed in a second. During this time, he certainly warmed up decently, but it was possible to hold in his hands.
In general, he was baptized perfectly. I also tried to drill, drill without any problems. Knead the plaster with a nozzle type mixer. Paul buckets kneads to stretch, but still kneads.
According to the description weight 1,4kg. I weighed on household kitchen scales: without a 1.2kg wire with a 1.35kg wire.
I think later it is necessary to disassemble, look at the brushes, lubricate the gearbox, and it is possible to install the LED for the backlight in the handle.
In general, I recommend to buy if you need a compact and inexpensive drill with a function of a screwdriver for homework.
If you have any questions, write to pashtat@mail.ru

Advantages: Inexpensive. Qualitatively. Convenient.

Disadvantages: Not yet noticed.

Comment: For its price, it works out with a bang, had in the past 3 screwdrivers of other firms and I can say that this one arranged more. Powerful, convenient, easy to operate. The most important thing is that you do not need to think about batteries. I did not find any analogs for this shurik ... or they are not there just))). For home - the best and reliable assistant. I recommend everyone to buy this unit.

Advantages: inexpensive

Disadvantages: very weak, self-tapping screw on a tree of 70 mm in a dry pine spun ... smelled winding)))

Comment: for GKL - it will go for unprofessional work, and that's it ... I bought nothing for the price

Advantages: comfortable, lightweight, with a ratchet at the time of tightening, a lot of speeds

Disadvantages: Heats up at work, others did not find

Comment: Arranged absolutely everything! Starting with the fact that you do not need to think about charging batteries and ending with convenience. He justified all conceivable and unimaginable expectations for his price. In my opinion, this screwdriver has no analogues at all, or very few. You can set the torque. At first I was embarrassed by the cartridge without spindle lock, but thanks to the reverse, everything changes by a factor of two. Yes, and the engine keeps quite tight ... Rubber grip, easy switch to reverse, the absence of a shock mode, I think a plus. You can forget about the batteries

Advantages: The price, power, easy, quite good assembly, a soft cord.

Disadvantages: Short cord, a lot of marriage (read in the comments)

Comment: When buying, I went through 4 pieces until I found what I need, or the cartridge dangles or the torque adjustment is inadequate. I found what I wanted, the device only pleases the powerful, excellent adjustment of the force, in my hand like a cast. For those who are looking for a spindle brake, first I advise you to look at the price tag. When buying, I advise you to check the backlash chuck and poor adjustment is very easy to identify, even to an inexperienced person.

Advantages: If it were not for the shortcomings, it would be very good for its price. That is, in the hand - comfortable, the engine works well. Speed ​​selected comfortable.
If you only twist thick and long screws (more than 3.5x18) into only hard and durable material (thick timber, 5 layers of chipboard) - it works well.

Disadvantages: Since this is a screwdriver, adjusting the torque is very important. Almost no adjustment. At the smallest torque, it tears the splines of small screws or scrolls them like a drill with a chipboard thickness of 16mm. With a little big moments - it works almost like a regular drill.

Comment: The device is raw, unfinished. It's a pity.

Advantages: Adequate price tag, sufficient power

Disadvantages: Bad chuck, it’s just not realistic to tighten normally (a bit falls out quite often), there is no fixing of the spindle; short cord (pleases anything that is not plastic); no brake (does not stop immediately after releasing the button); no case

Comment: The fattest minus for me is the cartridge (just annoying)

Advantages: Very convenient, easy and powerful network screwdriver. Nice to hold in your hand. Takes up little space. Well assembled. Screws, confirms forges perfectly. Cheap.

Disadvantages: No spindle lock, unfortunately. The cord is only two meters. Unlike battery analogs (for example, DA-18ER), it heats up a little under severe loads. Although for the price disadvantages are not noticed.

Comment: I bought it for 1270 p. one of the first. I took it for use only as a screwdriver, since I have a drill. Sellers say that it is snapped up with a bang. Not surprising, because it is very convenient and powerful! However, I don’t know if it can be used professionally with heavy loads (in the sense of 8 hours per day and 2000 screws per shift), and for homework it will become an indispensable and reliable assistant. In general, I recommend a good tool.