7 best network drills

Next in the ranking of the best network drills, screwdrivers - Hammer DRL320 PREMIUM. In this segment, large and well-known manufacturers of power tools do not indulge us, so that on the shelves of shops you will be met by a variety of Chinese goods, mimicking the European, American, and even Russian assembly. Here's a 320-watt Hammer from afar easily confused with the Bosch blue series - the design is very similar. And in the rest of the instruments of this brand, one can clearly see copying from “Bosch”, then from “Makita”, then from “Hitachi”.

The origin of the drill-screwdriver is a question worthy of the Mexican TV series. The official site refers to the Czech Zizkov, although the very name Hammer Werkzeug sr.r.o. - This is a terrible English-German mix, on the body of the drill s.r.o. turns into a GmbH and moves to Frankfurt, but one small inscription below brings the final line: “Made in China”. On the other hand, the same official site promises for the Premium line an extended warranty of up to 5 years, which in itself is already interesting.

But what will definitely draw attention to this drill is the versatility: in addition to the standard screwdriver-limiter, it also has a shock coupling, which is activated by a selector ring between the torque controller and the housing. Everything is simple and clear: the symbols “hammer”, “self-tapping screw” and “drill” will, without any explanation, show what is there and what for. On the case itself there is a two-position speed switch: the second drill can successfully work with drills, developing up to 1500 rpm, and on the first one it is already capable of delivering a good torque, up to 35 newton-meters.

The network drill-screwdriver “based on Bosch” came out good, although it has a tangible advantage in front, a little tiring brush at work. Of course, it is far from the original, but the price is lower. In any case, we recommend buying such a tool “live” and not on the Internet: it is better to always inspect the “yellow” assembly before buying to avoid problems later.

Inexpensive domestic network drill-screwdriver Interskol DS-10 / 260E2. Due to the small weight, it is convenient in operation. Anti-slip pads provide reliable grip. Keyless chuck will protect you from long-term replacement of bits or drills. With the help of a smooth press on the "Start" button (trigger), it is very convenient to make self-tapping screws. Two-way switch will help you choose the desired speed. Good network drill-screwdriver in terms of "price-quality". Cope with all the small homework.

“The name of you -“ Patriot ”- the old song“ Arias ”involuntarily scrolls in your head, awakened by the very name of the brand and the sound when working at maximum speed, resembling the scream of an electric guitar. Yes, the high-speed engine is noisy here, but it cools well (we leave in the direction of Interskol with these words).

Drill screwdriver came out easy, although the rest of the rating is inferior purely symbolic.Torque at the first speed - all the same 35 newton-meters, so that drilling and turning screws "Patriot" can just as good. Access to the brushes is not difficult, which is a plus - you should not expect a large resource from a Chinese drill. Although the usual home use and they last for a long time.

The cartridge is well centered, but, like the majority of similar models (“Again, I?” - exclamation from the “Interskol”), the large-diameter drills weakly clamped. But, even if you put another cartridge, low power will already begin to affect the drilling of metal: compared to other participants in the rating of the best drills, screwdrivers, the Patriot is rented earlier.

Although the name of this network drill-screwdriver is capable of causing a tear of nostalgia for the Soviet era, it is still produced in the regions where communism is still alive for all living. More precisely, it is the closest relative of Sturm, Hanskonner, Baumaster and Soyuz — all of these trademarks belong to the same Russian company that places orders in Chinese factories.

The drill is heavy (1.6 kg), but it feels normal in the hand, it does not twist the brush. In terms of power, it is ahead of the other participants in the rating (450 W), but its maximum torque is the same as that of the less powerful ones - 35 N * m. The handle is quite comfortable, the location and design of all controls is absolutely traditional.

Is Korea finally finally? By no means! We do not break the sad tradition, and this drill-screwdriver is still made in China. This is noticeable even without looking at the nameplate, according to the plastic smell and San Ou patron customary for the “Chinese” of the lower price segment, which also “Rebir type Latvian” sin now. The patron needs the most attention here: the beating for San Ou is like the reading of Mao's quotation book on binding. It should immediately check it with a drill.

But let's about the good. To the number of successful moments in the design of the drill-screwdriver we attribute the presence of LED backlight and automatic locking of the clutch-limiter torque when the second speed is turned on. You do not need to constantly turn the adjustment ring back and forth, moving from turning the screws to drilling. The torque of the drill is 24 newton-meters - not the best indicator, but acceptable. It is quite light enough, it sits well in the hand due to the soft lining on the handle.