Samsung Xpress M2070W

Advantages: Software on the manufacturer's website (many settings), works better than many similar ones. There is NFC (printed pdf from Android, just attached to the printer).

Disadvantages: Small cartridge at start; the account in the cartridge by the number of sheets, and not by the actual consumption of toner; cartridges less than promised; the printer overheats quickly; if the paper runs out, then after adding, you need to open / close the top cover (moreover, this is the manufacturer's recommendation); paper falls out of the top tray when printing (there is not enough plastic "lid")

Comment: * At the start of the cartridge was enough for 250 liters, then on the panel the inscription ("replace the cartridge"). There is a possibility that not many people notice: select the "continue" arrow in the menu on the printer panel. Approximately 50 more sheets were printed, then the toner ran out. At the same time, I printed a regular document - only text (approximately 75% occupancy), practically without graphics.
* I bought the second cartridge on L (there are two models - the usual S (mall) and volumetric L (arge)), I began to print in economy mode (choose not on the printer, but in the printer properties in the OS). On the manufacturer's website stated that L - 1800 sheets. As soon as these 1800 sheets were printed (all - in economy mode, with a minimum of graphics, low occupancy, large (12) fonts) - the “cartridge is over” again. I added another 200 sheets, then the quality fell even for economy mode. Some users say that they are treated with a special firmware (in some places it is sold for 500 rubles), but I did not dare. Since many have flashed after flashing the ability to print via WiFi.
* When printing more than 300 sheets in a row (sometimes 200 sheets) - it overheats at room temperature, begins to “print” 5-8 sheets each. That is, 5-8 sheets prints - a pause of seconds for 15 (apparently, it cools down), again 5-8 sheets - a pause, and so on. Put on a draft - it helps, but only slightly. And this is still in winter.
* Top paper tray poorly thought out. If you print on paper more densely than the standard 80 (on the manufacturer’s website I hardly found it - up to 160), then the paper “curls” and falls out of the tray.Put an extra sheet of very thick paper.
* Paper feed at the bottom - difficult to align. Noticed that some sheets are printed a little crooked (for most ordinary users - it will be imperceptible).
* Do not turn on eco mode on the printer - it then prints 2 pages per sheet, it is better to choose in the settings.
* Suddenly the cartridge began to creak - it was cured by re-installation.
* Used only original consumables.

Advantages: Prints, copies, scans. Quality is all ok: paper is white, letters are black.

With wifi and google, cloud print is a magical device that can be removed out of sight and not cumulated around a computer. You can scan without sitting at the computer, and it can be done so that you get multi-page pdf-nicks, the completion of which is also driven from the buttons on the mfu.

There is also a native Samsung application on the smartphone, and Google Cloud print (already mentioned) also understands everything, you can safely print from the phone without any wires and flash drives.

Disadvantages: - the cover of the scanner turned out to be somehow unexpectedly flimsy, the first time when I opened it, I was even frightened that something had broken off
- standard for home printers no closable (dust) paper tray; actually, it stands without paper, I load when I have to print; in the assembled state, not only does not collect dust, but also looks neater, so it's quite ok, it's all about

do not affect the quality of work of MFP

Comment: For a nominal printer-scanner-copier "to be" and its price range - a great option.

tune everything on the wire. on wifi - after installing the software and setting it up.

Advantages: Fully remote control. Quick connect. Easy to set up. Good print quality.

Disadvantages: Quite impressive dimensions, although this is the norm for this class of machines, I just did not expect it after the jet. It bends the edges of the paper after printing, although this is typical of laser printers.

Comment: 27/11/14 When choosing, there were 3 main criteria: laser printing, the availability of a wireless Wi-Fi module and that there was an MFP, and the price tag to within 5-6 tons. In principle, at the stage of installation and study after the purchase, he fully justified the choice, connected quickly. It was necessary to press only the WPS button and voila - it is online. Also important when choosing a factor was the MFP, so that it prints and scans, well, you understand. And in conjunction with Wi-Fi, this opens up new opportunities for interaction with the multifunction printer: now all this can be done from tablet computers, phones, etc. Send a scanned document to my brother? No problem, you put it in the MFP, you launch the application and after 20 seconds the image is already on the phone and you send it by mail. No need to turn on the computer and wait for it to boot, etc. It was possible to fasten the MFP to the computers in a couple of moments, well, in our family it turned out that all the poppies, so there we had to press 2 buttons. In Windows, you may have to install something from the disk. Such are the impressions. During the operation I will replenish the review. Let's see how the network will hold, because it’s the only thing that can upset me in it. I don’t know yet about the possibility of re-charging cartridges. AirPrint works without complaints.
UPD 12/11/15 For the year did not reveal any problems. The network keeps stable. Prints / scans as needed. A couple of days ago I downloaded the firmware for it on the Internet (for 500r) so that you can refill cartridges. The cartridge bundled with the printer was designed for 500 lines and somewhere on the 480 page it began to print worse. What was my surprise when I reflashed the printer and the same cartridge began to print as new. Apparently, it is incorporated at the software level that if the cartridge chip is indicated 500str, then by 500 it stops printing. I took a picture of the printed report before and after the firmware, the difference is obvious! http://s018.radikal.ru/i517/1511/b6/2ea8de6002de.jpg However, the cartridge has not refilled yet, I didn’t expect the old one to be resurrected)) But this should not be a problem now.

Advantages: price, ease of use, wi-fi, little sound

Disadvantages: paper does not fold inside the MFP

Comment: My husband and I bought this MFP, read the reviews for a long time, doubted between hp and samsung. Connecting to wi-fi is very very simple and there are instructions. The first time with the wire hooked up, then put it in another corner of the room. My husband android is nfc and he immediately connected to the printer and started typing everything, including the site pages and pictures ... I did a little with iOS, but on the computer I updated all the programs for the MFS and everything turned out. Air print is not yet configured yet, but through a special application, Samsung mobile print, everything prints for both my husband and me. I like the speed, noiselessness, the price of replacement cartridges (3 times cheaper than hp). Once missed a sheet in print (book printed) is the only cant. They took for home use - my husband for study, for work I am a designer. Very pleased!

Advantages: - Easy software installation (wi-fi connection from the disk looks like "Next" - "Next" - "Next" - "Done" - half a minute)
- Austere design, everything is clear and simple to consumers of any category
- Convenient scanning software | cartridge monitoring included
- Good quality and speed of printing, meet the expectations for devices in this category
- Availability of NFC and Wi-Fi. I plugged it into the outlet, put it in any place and forgot about the wires once and for all.
- Available and popular consumables

Disadvantages: For the month of using all the functions of the MFP, I did not find objective deficiencies that are critical for the product in this price category. Scanning from firmware is really 600 dpi, I didn’t see the need to figure out how to scan with 1200 dpi - everything suits.

Comment: I was looking for a good multifunctional device in the average price range for working in the house-small office mode. Month coolly copes with all assigned responsibilities.

Advantages: Wi-fi, scanning and printing without wires - was the main goal, despite the not cheap and not capacious cartridge (it is 100% suitable for home). All the problems were tweaked, the instruction had to be opened once because of "when copying A4 prints on the floor sheet (A5)" - as it turned out, the "culprit" - eco-printing on page 59: Select (Menu)> System Setup> Setup> Eco Settings control panels. = Off: Turn off eco mode. OR press the Save button on the panel)

Disadvantages: a cartridge ... but I'm not going to flash (refill) (I don’t see any sense for the house), there are compatible cartridges.

Advantages: Very easy to configure from disk. Samsung Mobile Print highly recommend.

Disadvantages: I can not understand why (I) when copying A4 displays on the floor sheet (A5)

Comment: I decided to find a replacement without the time of the late Canon MP630. By inertia, I was looking for colored inkjet multifunction printers for a long time. But I was very confused by the cost of the printed page. I very rarely print. Because of this, the cartridges were changed not by consumption, but by drying, which strained me a lot. I also didn’t like it that when I want to print text (only a black cartridge is required) the printer refuses to print because it needs to be replaced with cyan, green or crimson. Because of this, it was necessary to keep in reserve the entire set of cartridges.
I decided to remember. how often i printed something in color. It turned out to be very rare, before that, it was not important.
Also, the main part that is subject to repair inkjet printers (MFPs) is the printhead, which fails due to overheating, due to the end of the ink. The cost of repair in this case starts from 2,000 rubles. In my case, it cost half the new MFP.
As a result, I decided to take a laser monochrome. I use it recently, but I am very pleased.
First, the setup is very simple (when you first set up, you need to connect via USB).Frankly, I made a mistake, by habit of putting the installation disc aside, tried to download everything from the Samsung website. Do not do this. The installation disk checks whether the new software is enough on the disk and updates it from the site if necessary.
Secondly, the printing speed has increased significantly, even the first sheet, taking into account the heating. The inkjet is also preparing for the first sheet for a long time, as if it makes the choice of its whole life.
There is nothing more to say. There will be something - I will update the review.

Advantages: High print quality + reasonable price.

Disadvantages: My copy of a double-sided paper clamp does not croak horizontally.

Comment: The simplest installation and configuration. Many people write about the complexity of setting up Wi Fi, about dancing with a tambourine - in my case there was nothing like that. The printer received a dedicated address from the DHCP router and it all worked right away. As for the frequent disconnection of Wi-Fi from the printer, I have this: the printer is constantly in sleep mode to print, in general it is not necessary to approach it and turn it on. When sending a print from a computer, the router wakes up the MFP itself and it prints everything perfectly, and then after a few minutes it falls asleep again. All over Wi Fi. Therefore, I do not understand that someone is disconnected there. The printer is constantly sleeping when you type - wakes up.

Advantages: Not expensive, good print quality, scan and copy. Simple operation

Disadvantages: Not immediately managed to connect via wi-fi. Not quite correct and inconvenient user manual.

Comment: It took a lot of time to connect this multifunction device via Wi-Fi via a home router. I recommend immediately download from the office. Site latest firmware, drivers and software to connect: Easy Printer Manager and Easy Wireless Setup. All programs that are on the disk is better not to use, because with them I could not connect via wi-fi. It is better to configure the connection via a wi-fi router using a USB cable. At the same time, the Wi-fi - direct function needs to be disabled in the settings of the printer itself, and not enabled, even when the installation program suggests to do this. But first of all I advise you to connect this multifunctional device in the traditional way via USB and update the firmware. Just run the firmware file (Firmware File) downloaded from the official samsung website, nothing complicated.

Advantages: I bought exclusively because of wi-fi and nfc - no wires! You can easily and quickly print any document from any phone with nfc just by touching the printer. Prints from any laptop / PC from other parts of the apartment / office, which is also convenient.
It works quickly and efficiently!

Disadvantages: Unless, the color decision - would make it monolithic. And there is not enough screen illumination.

Comment: Already bought three of these cars home and office - everyone is happy!