Specifications
General characteristics | |
---|---|
Type of | electric chain |
Design | manual |
Power | 2000 watts |
Chain pitch | 3/8 inch |
Treatment | |
Tire length | 40 cm |
Maximum bus length | 45 cm |
Additional Information | |
Functions and features | chain brake |
Weight | 4.4 kg |
Reviews of Makita UC4030A chain saw
Merits
- No tools required to remove the chain. Automatic chain lubrication. Perfectly coped with a birch felling 60 cm in diameter. It uses almost any oil despite the fact that the instructions say to use only oil from the manufacturer. In general, an excellent saw for work at the dacha.
disadvantages
- I didn’t find a single drawback for myself, except that after pouring oil into the tank it sometimes leaks (not significantly), but is corrected by wiping the tank neck and the lid.
Comment
For me, this saw was an excellent replacement for the Parma M saw (84 GV). Now you can safely forget about manual lubrication of the chain and changing it directly using the tool. The only pity is that the leading chain sprocket can be changed only in the service center.
Repotraft 2010-08-15 Evaluation 5
Merits
- Great saw!
disadvantages
- After use, I began to clean, and somehow it turned out that when I unscrewed the clamp of the tire, a clamping nut with a spring jumped out. I had a good time to see where I fell otherwise I would not have found it in the grass. Be careful !!!
Comment
Sawed a log of 38 cm. As a knife enters the oil. It works quietly, so it seemed after gasoline. And yet, I have electricity planted in my country house. In place of 220 only 170 ~ 190. I thought it would not turn on at all. Everything was normal ... did not notice any differences from the gasoline!
slovariks, 2011-09-05 Evaluation 5
Merits
- Weight + weight distribution, easy to use and maintain.
disadvantages
- Not found
Comment
I bought about a month ago to the dacha (the average area is ~ 20 hundred., A lot of trees), in total I worked for 8-10 hours.
There were no problems during operation. The maximum diameter of the log was about 30 cm., An average of 15-20 cm. It is bitten into oil, saws vigorously, did not bounce even once (it was necessary to saw at different angles / positions, including severely violating the manufacturer’s safety recommendations extremely carefully).
Easy to maintain! On the Internet, I easily found the official parts catalog with a clear scheme - you can change all consumables yourself, if you suddenly need it during operation (relative Makit 3501 has been working all year round to prepare firewood for the bath, they forgot to pour oil on it (forget it) ... the tire is my own, the chain was changed once, the brushes did not touch)!
4030 oil consumes a bit, but I pour a thick transmission Castrol Syntrax Universal. For example, a friend of Makit 4020, in his words, drains the tank noticeably + some oil flows out during storage, which I did not find in 4030!
Very pleased with the purchase! Sawing further))
drivebuy 2013-06-24 Evaluation 5
Merits
- Very easy to use. It lies well in the hands and does not slip due to rubberized handles. Not really loud roars. Ears do not lay at least. The course of the chain is smooth, not jerking. It also does not turn sharply. Power level - copes with work easily. Simple and unpretentious to maintain. Not bad thought out security system. Oil consumption reasonable
disadvantages
- Really good power gives only with the appropriate voltage. And it is sometimes difficult to find out of town. But if you have, for example, a private house, problems should not arise. Well, a couple of times noticed that a little oil is leaking, slightly, but still.
Comment
Good quality build tool. For home / cottage - quite suitable. I consider it unwise to use professional tools for domestic purposes. Well, in the price difference will be noticeable. And I have been using this for about five years now, and in general there are no complaints about it.
dobodov, 2012-11-07 Evaluation 5
Merits
- Low power consumption.Spruce 32goda (in rings) for full processing (cut into chocks + branches into firewood) spent 1kW for 2 hours of non-stressed work (I had to take out 30 meters)
disadvantages
Comment
Power, judging by the chain can be and more. If you press a little more, the engine goes out. Well, okay All the same, the Tool is not PROFessional. This is written in the instructions.
Anonim 2012-08-24 Evaluation 4
Merits
- Comfortable in the grip, long rubber cable, easy to tighten the chain without tools, narrow, relatively light.
disadvantages
- Sometimes with thick kerfs it can stop, there is a little lack of power, but for that kind of money, this is in fact not a disadvantage.
Comment
I took a chain electric saw, because I was tired of swaying with gasoline, and, of course, it was more convenient to use electric when building - I took the slash and set it aside, but with gasoline, as a rule, dancing with tambourines while you start, again with gasoline, etc. I have been drinking for a couple of years now, no problems with reliability have arisen, nothing has broken off and is not lost. I use the most ordinary car oil - the cheapest.
fffffff7.ivanov, 2013-03-03 Evaluation 5